ok guys im doing my first big mod, im change the whole interior of my ED fairmont to these, i jsut won

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0321914674

question is, one is it very hard to do?
two, will i need any special tools
three, does anyone want a steam cleaned *one a month ago* fairmont interior, seats, doortrims. (pm for that)
any info will help guys thanks

Hi

To remove and replace the front seats you will need a torx bit size 50. The rear seat base is just clipped in place. From the front of the seat, push back firmly and lift up. You have to push harder than you think. The side bolsters have a 10mm bolt at the base, and then you have to lift up and out. The reat seat backs have bolts along the bottom of the frames.

The door trims should be held on with philips screws around the edges, and the door handles are also a torx bit, but smaller. When all the screws are out, take off the plastic trim where the mirrors are, and then lift up on the door trim. Oh, and don't forget to remove the sniper button from the interior door lock.

Then do all that in reverse.

Have fun.

BenJ

prob need a T50 torx bit to undo the front seats you,ll see looks like a star shape in the bolt head can get em from Total Tools think i paid about $10 bucks for mine with back seats the bottom half just push back and lift up and look for coins and any other good stuff from previous owners then undo the bolts for the top half of back seats. Ya rear seat side bolstews take the black round cover of the seat latch try a spark plug socket to undo it should come out with the door trims you,ll see 3 plastic caps in the Door handles with a small flat blade screwdriver flick off and now you,ll see you need A T25 torx bit then undo all screws around the door card and pull up and off the door lock button thing hope this helps

thanks heaps guys
any one interested in the old interior not asking much

thanks heaps guys
any one interested in the old interior not asking much