Fordmods Logo

Alternator issues... 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: Alternator issues...
Posted: Mon Nov 17, 2008 6:39 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1056

Joined: 14th Feb 2005

Gallery: 26 images

Ride: '97 EL XR6

Location: Cairns
QLD, Australia

I believe my alternator is on its way out and just need to make sure there isn't any other issues.

My gauges in my cluster are showing constant drops in volts from 13.5 down to 11 while driving. Also as the volts drop the oil pressure gauge goes up to 5 from 3. Is this just due to lack of power from the alternator?

Any info would be good.
Top
 Profile  
 
 
Posted: Mon Nov 17, 2008 6:45 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 10829

Joined: 17th Apr 2005

Gallery: 34 images

Ride: BF MK11 XR 6 TURBO ZF 6spd

Power: 225 rwkw

Location: glenwood/sydney
NSW, Australia

i dont know about the oil pressure skike.. -perhaps its just the guage as it is being affected by the voltage drop... i had the same problem when my ef alternator s**t itself.. volts randomly dropped low.. -and stayed there..
Top
 Profile  
 
 
Posted: Mon Nov 17, 2008 6:50 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

could be the regulator inside the alt that has gone

very easy to replace

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Mon Nov 17, 2008 6:51 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1056

Joined: 14th Feb 2005

Gallery: 26 images

Ride: '97 EL XR6

Location: Cairns
QLD, Australia

It only just started doing it today. When I first started driving around town the gauge sat at 10.5 with the air con on. I then turned that off and 30 seconds later it spiked back to 14 and then dropped back down to 11 where it stayed the whole time. I've since cleaned the contacts and plug and have driven 100km to take my daughter home and the whole time it was doing what I said in my first post.
Top
 Profile  
 
 
Posted: Mon Nov 17, 2008 10:15 pm 
Smokin em up
Offline
User avatar

Age: 40

Posts: 206

Joined: 26th May 2008

Ride: EF XR6

Location: Brisbane
QLD, Australia

Yeah if it is a alternator prob it will be the voltage regulator.It happened to mine but i had power surges to 16 Volts seeing the same symptoms with my gauges due to the fact they are all electroinc gauges. It is very bad for the ecu to get power surges like that so i would either stop driving the car and get the alternator recoed or disconnect the plugs from your alternator to stop it charging the battery you should be able to drive for a day maybe two on battery power alone if you don't have every accesory on

 

_________________

EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year.

Top
 Profile  
 
 
Posted: Mon Nov 17, 2008 10:47 pm 
Smokin em up
Offline

Posts: 258

Joined: 30th Dec 2007

Location: cairns
QLD, Australia

If you can put the battery on a charger ,the smaller the charger the longer you leave it on.Also check that the positive terminal on your alternator isn't loose and clean your battery terminals if they are corroded.Cheers
Top
 Profile  
 
 
Posted: Mon Nov 17, 2008 11:59 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1056

Joined: 14th Feb 2005

Gallery: 26 images

Ride: '97 EL XR6

Location: Cairns
QLD, Australia

Battery is brand new (only a month old) and I've checked and cleaned the connections on alternator. It was fine for the trip home just now (another 100km) with lights and air con on, till the moment I was one street a way from my place and the voltage dropped off again.

Ah well... I guess it's off to the auto elecky asap to get it fixed and hope it is a simple fix $$$ :( more money out then coming in these days.
Top
 Profile  
 
 
Posted: Tue Nov 18, 2008 6:34 pm 
Getting Side Ways
Offline

Age: 68

Posts: 437

Joined: 11th Nov 2004

Ride: EL GHIA

Location: adelaide
SA, Australia

my bet would be the brushes

they could be worn and making contact sometimes or sticking or poor contact because of oil contamination

if it is either of these a strip and clean and new brushes is a cheap fix but do it soon else u WILL blow the regulator or diodes guaranteed
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 55 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 29, 2024 5:39 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names