Fordmods Logo

Dont replace your fuel sender unit 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Dont replace your fuel sender unit
Posted: Fri Nov 21, 2008 6:26 pm 
Getting Side Ways
Offline

Posts: 443

Joined: 23rd Nov 2007

Location: Brisbane
QLD, Australia

Ok, seems a bit strange but here it goes..


I just came back from the local ford spare parts to see about a replacement sender unit for my ED ghia as is shows different fuel levels ALL the time..

The spares guy said the sender is no longer available and I shouldn't worry about it because the plastic ring cap ($75) EA-ED will not fit back on due to a problem with the nylon made fuel tanks expanding over time between 5-10mm thus the caps,new ones included not being able to fit on...

He did say that a special size hose clamp($25) (size unknown exactly) were used but these also were known to fail/break...


A special tool was used by ford to remove the cap also as other methods, such as a screwdriver/hammer will just break the caps...


I am sure a few people have replaced there senders and I was wondering is this true?

Also,what method is best for removing the cap anyway..As a note I was reccomended to see Otto Instruments for fixing the sender unit,I think they are in Rocklea...
Top
 Profile  
 
 
Posted: Fri Nov 21, 2008 7:09 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

Sure it the threaded part can expand but 5-10mm would be s**t.

There are plenty of people that have replaced pumps/senders with No problems, me being one of them.

I made a basic tool see below.

Image

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Fri Nov 21, 2008 7:14 pm 
Getting Side Ways
Offline

Age: 38

Posts: 996

Joined: 9th Aug 2005

Ride: BA XR6T ute

Location: frankston
VIC, Australia

i use a big screwdriver and a hammer and ive fixed about 10 in my time no dramas... replace the sender with 1 from the wreckers
Top
 Profile  
 
 
Posted: Fri Nov 21, 2008 7:28 pm 
Getting Side Ways
Offline

Age: 38

Posts: 2334

Joined: 25th Apr 2008

Ride: Boxcar Love

Location: Brisbane
QLD, Australia

HAHAHA did you go to tingalpa or mansfeild ford??? They are f**k novices!

 

_________________

Commodore australia's favorite car??? What a load of s**t
Image

Top
 Profile  
 
 
Posted: Fri Nov 21, 2008 7:29 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

Krytox's home made tool would do the trick perfectly but i didnt have the time to make one like his. So all i did was fit 2 pairs of vice grips to both sides of the boot floor opening to the cap, then used 2 large flat head screw drivers and used the vise grips as pivot points to lever off to twist the cap undone.
Top
 Profile  
 
 
Posted: Fri Nov 21, 2008 9:13 pm 
Getting Side Ways
Offline

Age: 55

Posts: 903

Joined: 7th Sep 2007

Gallery: 3 images

Ride: BF3 Egas wag SY AWD Terry Ghia

Location: Brookfield
VIC, Australia

no probs with the wagon but I jammed the float refitting the first time.
then I got the thing working but had a leak.
third time lucky and havent touched it for 5 years since.

 

_________________

BF3 Egas XT Wagon
SY Territory Ghia AWD 6spA :))

Top
 Profile  
 
 
 Post subject: sender
Posted: Fri Nov 21, 2008 9:40 pm 
Getting Side Ways
Offline

Posts: 443

Joined: 23rd Nov 2007

Location: Brisbane
QLD, Australia

Thanks guys, I thought it sounded a bit like BS..

Would it make any difference though if I put a sender unit from a 6cyl wreck into my 8cyl tank? I didn't think there were any difference in the tanks holding capacity except for perhaps Fairlane/LTD..
Top
 Profile  
 
 
Posted: Fri Nov 21, 2008 10:29 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

I replaced my fuel pump as it died. I followed the directions in the Gregorys and made up a special tool. Worked a treat. I don't see why a V8 sender won't work in a six and visa versa.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 5:33 pm 
Getting Side Ways
Offline

Age: 40

Posts: 6746

Joined: 13th Mar 2006

Gallery: 10 images

Ride: SF5 Forester

Location: Bathurst
NSW, Australia

hahaha WHAT! i have removed and replace mine in my old EB my father has done it in his EA From EA to EL and maybe AU have the same bloody ring and almost use the same sender unit

 

_________________

R.I.P Tobias my son.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 1:32 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names