Fordmods Logo

Oil EVERYWHERE!! 

 

Page 1 of 1 [ 14 posts ] 

 
 Post subject: Oil EVERYWHERE!!
Posted: Sun Nov 16, 2008 7:16 pm 
Fordmods Newbie
Offline

Age: 42

Posts: 8

Joined: 31st May 2005

Ride: EF Falcon

Location: Adelaide
SA, Australia

Hi,

hoping someone can help me out....my cars always leeked alittle oil from around the sump but im pretty sure ive got a whole new problem.

Recently theres oil right around the front of my engine, on the side of the battery cover, top radiator hose and altenator etc...any ideas, hoping its easy.

Thanks

Oh yer its a i6 ef.

Last edited by ZaNY on Sun Nov 16, 2008 7:40 pm, edited 1 time in total.

Top
 Profile  
 
 
Posted: Sun Nov 16, 2008 7:19 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

Either the rocker cover is leaking, or the O'ring for the P/S pump. or the engine oil pressure switch. Clean down the engine and have a look over the next couple of days.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
Posted: Sun Nov 16, 2008 7:22 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 5881

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: 2021 Amarok V6

Location: Port Lincoln
SA, Australia

damn you must have a rare car, ive never seen a V6 EF before ;)

 

_________________

2021 V6 Manual Amarok - 245kw/750nm - many goodies
1997 EL Fairmont Ghia 4.0 - Heritage Green & Cappa
2010 Suzuki GSX650F - when I want to be silly

Top
 Profile  
 
 
 Post subject: Re: Oil EVERYWHERE!!
Posted: Sun Nov 16, 2008 7:23 pm 
Getting Side Ways
Offline
User avatar

Age: 63

Posts: 1584

Joined: 20th Mar 2005

Ride: EDL Fairmont Wagon/AU XR8 Ghia

Location: Riverstone
NSW, Australia

ZaNY wrote:
Oh yer its a v6 ef.

V6 EF?

 

_________________

=1994 ED Wagon GLi body/EL Fairmont spec with *ALL* EL running gear.=
Build Thread: viewtopic.php?f=53&t=65695
=1998 EL Futura Sedan - The EF Fairmonts Replacement=
Build Thread: viewtopic.php?f=53&t=106588

Top
 Profile  
 
 
 Post subject: Re: Oil EVERYWHERE!!
Posted: Sun Nov 16, 2008 7:29 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

EDIT: ooops

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Sun Nov 16, 2008 7:40 pm 
Fordmods Newbie
Offline

Age: 42

Posts: 8

Joined: 31st May 2005

Ride: EF Falcon

Location: Adelaide
SA, Australia

I6 ef probably would of been the better way to describe the engine....

Just question about cleaning the engine (i read the post about degresing) if i spray under the bonnet with a hose (thinking of going to happy wash..) am I going to do much damage, obviously avoid washing the battery etc..
Top
 Profile  
 
 
Posted: Sun Nov 16, 2008 8:43 pm 
Getting Side Ways
Offline

Age: 41

Posts: 1353

Joined: 15th Mar 2007

Gallery: 7 images

Ride: AU XR6

Power: 171 rwkw

Location: thornton
NSW, Australia

from the timing chain tentioner perhaps

 

_________________

9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track.
86 ZL mint grandpa spec with premo sound and 150000km
07 TTG 60000km stock as, mods to come.
97 el futura about to be MOCKed

Top
 Profile  
 
 
Posted: Mon Nov 17, 2008 8:06 pm 
Oompa Loompa
Offline
User avatar

Posts: 36

Joined: 16th Aug 2008

Ride: BF xr6, EB

Location: Adelaide
SA, Australia

My eb had a similar problem I was told it was a oil pressure switch for me it wasn't it was the trans lines running to the radiator had been rubbing on the fan belts and worn through which sprayed fluid all over the engine bay. So thats something you could look for.
Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 6:42 pm 
Fordmods Newbie
Offline

Age: 42

Posts: 8

Joined: 31st May 2005

Ride: EF Falcon

Location: Adelaide
SA, Australia

Got some more info....removed the fans from the motor today & started it up. The oil is comming from around the water pump, on top and running down from there.

Its got me abit confused becuse i didnt think the water pump had oil run through it.

Any ideas??
Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 6:45 pm 
Getting Side Ways
Offline
User avatar

Posts: 6168

Joined: 5th Nov 2004

Clean the engine bay up with degreaser so that you cant see some oil - then take it for a drive and see where the oil is coming from...

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 6:50 pm 
Fordmods Newbie
Offline

Age: 42

Posts: 8

Joined: 31st May 2005

Ride: EF Falcon

Location: Adelaide
SA, Australia

i did clean it, no need to drive it because as soon as i start the car the oil starts running from just above the water pump
Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 7:09 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 3687

Joined: 4th Mar 2005

Gallery: 23 images

Ride: XR6 Turbo

Location: Taree
NSW, Australia

Timing chain tensioner

 

_________________

SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat.

Mods going on: Nizpro springs, bosch 040 pump + Walbro gss341, 600cc injectors, PWR transcooler, 20% Underdrives, 15psi Actuator, Kingspring SSL's, 15psi tune.....More coming

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 8:12 pm 
Fordmods Newbie
Offline

Age: 42

Posts: 8

Joined: 31st May 2005

Ride: EF Falcon

Location: Adelaide
SA, Australia

that sounds bad (great timing with christmas etc...) :x :x ...ive done some reading through other posts, and am i understanding you have to drop the sump to change the timing chain tentioner???

Sounds abit outa my depth of minimal mechanical knowledge...

anyone know how much i should expect a mechanic to charge??
Top
 Profile  
 
 
Posted: Sun Nov 23, 2008 11:13 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

ZaNY wrote:
that sounds bad (great timing with christmas etc...) :x :x ...ive done some reading through other posts, and am i understanding you have to drop the sump to change the timing chain tentioner???

Sounds abit outa my depth of minimal mechanical knowledge...

anyone know how much i should expect a mechanic to charge??


You will need an O'ring kit for the tensioner and a special tool plus a piece of 1/4" tube and a 3mm allen key, and a w'shop manual.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 14 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 55 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 29, 2024 5:40 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names