|
| Gonadman2 |
|
||
|
Ok, please excuse my naivete and the fact that I have done a pretty extensive search on this site and couldn't find anything. As the topic asks, does the BA, BF turbo setup fit the earlier fords? If not, why not? Are any parts transferable. I figured there must a few of these hitting wreckers and such by now, or people doing upgrades and if it fits, it would be a nice upgrade.
Anyway, keen to hear peoples thoughts. |
||
| Top | |
||
| Dansedgli |
|
||
|
The manifolds have different bolt spacing.
Ports are in the same spot although oval instead of round so you could make an adapter I spose. |
||
| Top | |
||
| Gonadman2 |
|
||
|
Thought it would be something as simple as that. Was there a specific reason why ford would have done that, apart from making it harder to retrofit onto the older models?
|
||
| Top | |
||
| Steady ED |
|
|||
|
2 exhaust valves vs 1, port has to be wider.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| twr7cx |
|
|||
|
There are adapters available. i'm not sure who makes them though.
|
|||
| Top | |
|||
| MY.93.ED |
|
||
|
Check out Nizpro they make a plenum that adapts to the ef/el one. http://www.nizpro.com.au/plenum.html
_________________ Silver EB Fairmont- AU S3 engine, Tickford Head, EF handbrake, T5 manual, EF XR6 3.45 LSD, 2.5" Catback by Rapid Exhaust, EL BBM, EL XR6 ECU, EL Thermos, EB Ghia interior, Kingy Superlows, Monroe struts |
||
| Top | |
||
| EFFalcon |
|
|||
|
he doesn't need the plenum, he's talking about the exhaust manifold.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| skidder |
|
|||
|
is the ba manifold cast iron?
edit: just read that it is stainless steel. This should mean that it isn't as difficult to weld..
_________________ {USERNAME} wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
yeah but if he can find someone who does the plenum odds on they either do or know someone who does one for the exhaust side.
_________________
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: yeah but if he can find someone who does the plenum odds on they either do or know someone who does one for the exhaust side.
Not really, as they're 2 different products. Also, the Nizpro intake plenums use the standard lower half of the BEM - so they don't directly bolt onto the head. |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Meh, Just trying to help, They probably know of someone, but it would probably be better off getting a manifold made for e-series than retro fitting a b series, plenty of them out there anyway, plus by the time you source and buy a mod plate, it would probably work out just as cost effective to buy a manifold purpose built.
_________________
|
|||
| Top | |
|||
| Malakai |
|
|||
|
You can get new cast manifolds the same as the AIT and AVO kits of the late 80s and early 90s. They are virtually identical to the BA-BF manifolds. One place that I know of that you can buy them from is Mike Vine in Brisbane, google that name and you should find the workshop.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
