Fordmods Logo

Bottom end power increace 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: Bottom end power increace
Posted: Thu Mar 24, 2005 7:42 pm 
Oompa Loompa
Offline

Age: 39

Posts: 29

Joined: 16th Mar 2005

Gallery: 4 images

Ride: XT

Location: Melbourne
VIC, Australia

PPL with EA-EDs out there. If ya want a bit more bottom end power. Take your car to the nearest exhaust place and get them to move your airflow sensor to behind the Cat. You will find better Take off

 

_________________

BA XT. 20'' BSA rims ss induction. in car entertainment.

Top
 Profile  
 
 
Posted: Thu Mar 24, 2005 7:51 pm 
Getting Side Ways
Offline

Age: 47

Posts: 2015

Joined: 9th Mar 2005

Gallery: 4 images

Ride: Territory TX AWD & AUII XLS EGAS

Location: East Kurrajong
NSW, Australia

But the airflow sensor is on the intake ... from what I can gather.

Unless you are meaning oxygen sensor ... then I can understand that.

 

_________________

04 Territory TX AWD - Winter White - optioned up
06 Falcon BFII XLS ute EGAS - Winter White - EGA-54D Version 2

Top
 Profile  
 
 
 Post subject: whoooops sorrry
Posted: Thu Mar 24, 2005 9:20 pm 
Oompa Loompa
Offline

Age: 39

Posts: 29

Joined: 16th Mar 2005

Gallery: 4 images

Ride: XT

Location: Melbourne
VIC, Australia

Yep ur Right i ment the oxygen sensor (f**k) :oops:

 

_________________

BA XT. 20'' BSA rims ss induction. in car entertainment.

Top
 Profile  
 
 
Posted: Fri Mar 25, 2005 2:59 am 
Tyre Shredder
Offline

Age: 38

Posts: 391

Joined: 9th Feb 2005

Ride: EB falcon 5spd

Location: adelaide
SA, Australia

how does this work?

 

_________________

1993 EBII GLI, IT'S PERFORMANCE Stage 3 engine,
XH Snorkel, K+N panel, Pacie 4480, High flow cat,
2.5" Lukey cat back system. Monroe GT Gas shocks + struts.

just dyno'd at 140.9RWKW

Top
 Profile  
 
 
Posted: Fri Mar 25, 2005 3:48 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 492

Joined: 8th Nov 2004

Gallery: 2 images

Ride: EF Fairmont Wagon, ph34r!

Location: Northam
WA, Australia

I'm guessing that putting it there somehow tricks the EGO sensor into seeing more oxygen than they're really is which causes the ECU to bump the mixture up to "compensate".

 

_________________

Team Argon Silver

Top
 Profile  
 
 
Posted: Fri Mar 25, 2005 9:22 am 
Getting Side Ways
Offline

Age: 42

Posts: 533

Joined: 12th Jan 2005

Location: Melbourne
VIC, Australia

Well @ full throttle, or @ around about 80% and above actually, the signal from teh HEGO is ignored.

Also, cats are very sensitive to mixture. The HEGO will be reading lean and teh ECU will put more fuel in, so in 5000km, you're cat is going to be blocked up and you'll lose all that 'extra' power and be up for a new cat!
Top
 Profile  
 
 
 Post subject: sensor
Posted: Fri Mar 25, 2005 11:33 am 
Oompa Loompa
Offline

Age: 39

Posts: 29

Joined: 16th Mar 2005

Gallery: 4 images

Ride: XT

Location: Melbourne
VIC, Australia

trust me. i dont know how the f**k thing works but it makes a diff down low in the revs.

 

_________________

BA XT. 20'' BSA rims ss induction. in car entertainment.

Top
 Profile  
 
 
Posted: Fri Mar 25, 2005 2:43 pm 
Parts Gopher
Offline

Age: 40

Posts: 50

Joined: 30th Dec 2004

Ride: EB Fairmont

Location: Perth
WA, Australia

i can sorta know what you mean as it will run in closed loop mode in light load/throttle up to about 2100rpm in some cases (going by my a/f gauge) and the richer a/f would be the reason why. A drawback would be that the a/f would be richer at cruise and get worse economy.
Top
 Profile  
 
 
Posted: Fri Mar 25, 2005 3:52 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 1440

Joined: 7th Nov 2004

Ride: 320kw BA XR8

Location: Adelaide
SA, Australia

You won't get any more power, in fact you will probably loose a fair bit. Behind the cats, the O2 sensor won't heat up enough to function properly (if at all) and the AF ratio will be so inaccurate you may as well not have it. If anything it will cause a fairly rich mix which will mean more fuel consumption and possibly less power. Add this to the problem that most I6's have a problem running rich in the first place, especially with any mods.
Top
 Profile  
 
 
Posted: Fri Mar 25, 2005 7:32 pm 
Getting Side Ways
Offline

Age: 47

Posts: 2015

Joined: 9th Mar 2005

Gallery: 4 images

Ride: Territory TX AWD & AUII XLS EGAS

Location: East Kurrajong
NSW, Australia

EDXR8 wrote:
Add this to the problem that most I6's have a problem running rich in the first place, especially with any mods.


They do ... that is interesting indeed ... cos I think mine is running a bit rich ... I only have an upgraded exhaust though ... I notice it when I come to stop ... I can smell a bit of fuel ... not sure where it is coming from ... unless I can smell the rich exhaust mixture when I have the window open when I stop. That's probably what it is.

 

_________________

04 Territory TX AWD - Winter White - optioned up
06 Falcon BFII XLS ute EGAS - Winter White - EGA-54D Version 2

Top
 Profile  
 
 
 Post subject: Re: Bottom end power increace
Posted: Fri Mar 25, 2005 8:21 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

EBWPN wrote:
PPL with EA-EDs out there. If ya want a bit more bottom end power. Take your car to the nearest exhaust place and get them to move your airflow sensor to behind the Cat. You will find better Take off



that is one of the more stupid things i've seen one the net for long time.

i'm going to stress now that no one out there should do this.
Top
 Profile  
 
 
 Post subject: Re: sensor
Posted: Fri Mar 25, 2005 8:53 pm 
Getting Side Ways
Offline

Age: 42

Posts: 533

Joined: 12th Jan 2005

Location: Melbourne
VIC, Australia

EBWPN wrote:
trust me. i dont know how the f**k thing works but it makes a diff down low in the revs.


Post us a before and after dyno power graph and I'll believe you.

As for now, you probably just 'think' it has made a difference, but if you want us to trust you, then trust me, it'll make a bigger problem than it's worth in a few short months.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 2:56 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names