|
| PIMP_LTD |
|
||
|
Indeed ^^^^ and still wouldn't bring that to the street i work on!! haha.
I did more on the weekend, but i took pics on the wrong camera, the one i don't have a cable for. I finished the front floor, and cut out the rust in the back panel and took the piece to work today to make up a new panel. I had some 1.6mm zinc sheet laying around at work, it'll do nicely. Should have pics tomorrow.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| PIMP_LTD |
|
||
|
Ok, made up part of the rust repair panel today. It still needs 1 more bend, but its a tricky one, so i'll have to wait til the weekend and take it to the car and mark it out, then bend it at work next week, (note currentl the car is not at my house)
Firstly this is the rusty panel i cut out. Normally this amount of rust in 1 spot would dictate i f**k car, but for some reason, this was ever the only real "bad" bit. I think its due to a dodgy towbar install. 
Here i am cutting the zinc sheet into correct size. 
This is the new panel peices, it will be spot welded together like this. 
This shows the profile, i mader the 2 sections that will fit to the body of the car about 20mm longer so it can be spot welded in. 
More soon, stay tuned classic lovers.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| longlivethefalcon |
|
||
|
You need that on spoked 20s with 1 bar on the grill gold and the plates MAC DAD.
_________________ Mk2 Zephyr |
||
| Top | |
||
| PIMP_LTD |
|
||
|
You mean 20 wires like this LTD?
Yeah i may still do that, this isn't going to be the daily now, its going to be another weekend car, so i think i will roll on some phat rims.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| longlivethefalcon |
|
||
|
Thats exactly what i mean.
I love the siler monarchs and with that maroon interior its all drool value. I was looking at that car but the boss said no.
_________________ Mk2 Zephyr |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
now tell him it needs a 'charged 351 poking through the bonnet.... hopefully he agrees too
this project is gonna be sweet. As long as the V8 is fuggin loud, the body low, and the paint shiny...... its a winner !! 
|
||
| Top | |
||
| fordfreak ef |
|
|||
|
cant wait to see the car come to life... that gray fairlane is HOT!
|
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
Indeed it'll be low, loud and shiny, and PIMP AS f**k.
That silver LTD is bagged, with 20's, conversion was done by Mild 2 Wild Customs in NSW, and has plates that spell TANK. Recently sold on ebay if i remember correctly. I was supposed to do some more on it this weekend, but i hit the piss way to hard last night, and am too buggered. Next weekend FTW
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| huggiebear |
|
|||
|
looking great andrew... is that an EL sitting in the background? anything left of it? hehe
oh did your family member end up getting that chroming tank from the US? |
|||
| Top | |
|||
| ringastinga |
|
||
|
i recon put an ef/el interior into lol jk
|
||
| Top | |
||
| PIMP_LTD |
|
||
|
That would be my EF donor car, not much left on it at all besdies the doors, and glass.
I haven't spoken to my uncle recently about the chroming machine, i will have to find out because the LTD will be getting some parts done asap. hehe
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| huggiebear |
|
|||
|
that would be awesome if he has, as i have a few bits is like done
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
