i have recently done a manual conversion to my car since then i have broken an engine mount, i changed it the other day and its alot beter.
but when i flatten the accelerator then let go of the accelerator or even let go of the clutch to early i hear i snap noise or like to pieces of metal hitting together
im pretty sure its from the front what could it be the other engine mount? im pretty sure the other one was fine though
any suggestions
chhers..

easy enough to check an engine mount..
pop the bonnet, pull the hand brake on hard.. get someone to watch the motor (from beside the car) and ease the clutch out (ie let it slip a lil to load the motor up..)

if its broken the inlet side will lift up quite alot.. (maybe 5-6cm),


the exhaust side doesnt tend to break as the motor pushes on it rather than trying to pull it apart as it torques over.


-mitch

yeah thats what i did and i changed the inlet side engine mount but im still getting this snap noise when i dump the clutch or let go of the accelerator at high revs maybe tail shaft is f**k