Hi guys I have just Turboed my EF but now it blows smoke....... I have the same problem with my skyline and it was the tappet cover hoses so can any one tell me were the hoses go. if any one has any info with any of the Turbo stuff that would be a big help.

There is a hose going to thottle body.. Disconnect it seal off throttle body pipe.. Then run this hose to inlet / aircleaner via oil seperater..
The PCV should hold boost ?? But if its suspect ?? Replace with known PCV from blown engine..
A one way valve from V.L Commodor or Nissan around same build date will help ..
It won't hurt to add another breather in rocker cover. One made up from drilling hole in oil filler cap and to air cleaner via oil separater too..
Drilling out the rear breather hole in Fords 6's helps crank case breathing also..
If hose is left connected to throttle body.. You'll boost the crank case, spreding oil everywhere..
Make sure the oil return line is big and unrestrictive r oil will build up and blow through turbo seals..
hth...