|
| TerroristGHIA |
|
|||
|
OK, i have had a look and cant seem to get any joy. I have just finished the power window conversion on the ED and as a result i fitted some EF Ghia door cards. Now i have struck a problem, namely the EF Mirror controller runs 7 wires, and the ED one runs 5 for the switch as well as 4 extra for the drivers mirror. Then there is 2 that run from the mirro to the switch.
Could anyone help me out on how to get the EF Controller to work with the ED mirrors. Cheers Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
I can't seem to find the exact drawing i had of this wiring conversion, but this should help, courtesy of benj's thread.
And hear is said thread. This refers to his door mirror conversion, but should help anyway. http://www.fordmods.com./forums/post775271.html#775271 Andrew.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Along the right lines, but i am not changing to EF Mirrors at this stage. Will look and see what i can do with the above info.
Cheers
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
I still can't find, but should be able to explain.
The EF mirror loom will have the big plug that goes onto the back of the ef mirror switch, and the other small plug that goes to the ef mirror. When wiring the EF mirror switch to the EB door loom plug, the wires go, Purple to purple blue to blue red to red black to black purple/red to grey. Now you have to swap the EF mirror plug to EB. I can't find the colours of the drivers mirror, but should be same as passanger. The remaining 3 wires from the EF mirror switch plug will go to the EB mirror. red to brown purple to white blue to black. If you do the wiring like that, you'll be on the money.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| TROYMAN |
|
||||||
|
hope this helps..
this is from eb mirrors with el door trims..  ..
|
||||||
| Top | |
||||||
| PIMP_LTD |
|
||
|
Thats what i was looking for!
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Perfection, Cheers Troyman and Pimp
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| BenJ |
|
||
|
And here is my contribution, even if it may be too late.
The left side is the EF switch to the right side being the EB wiring. Hope it helps BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| W0rp3D |
|
||
|
Just want to clear a couple of things up, firstly im trying to use an el/ef mirror switch in an nc, if i was to wire it up like troyman has in his pictures this would create and adaptor which is what i want, problem is though coming off the el\ef plug there is 2 plain blue wires and 2 plain purple wires, in the diagrams 1 blue and 1 purple go to one plug and the other 2 go to the other, does it matter whic ones go to which, if i wire it up wrong it wont contolling the wrong mirror will it?
Also on the smaller plug there is nothing connected to the black wire, should an earth be wired to this one?
_________________
|
||
| Top | |
||
| BenJ |
|
||
|
If you get the wires wrong then yes it may control the wrong mirror, or the right mirror but wrong direction. If that happens, redo it.
You should be testing your loom before your wrap it up for the final time. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| W0rp3D |
|
||
|
BenJ wrote: If you get the wires wrong then yes it may control the wrong mirror, or the right mirror but wrong direction. If that happens, redo it.
You should be testing your loom before your wrap it up for the final time. BenJ I was hoping to get it easy and just wire it up on the bench and plug it in, will do the "suck it and see" method and post up a diagram so others dont have to use that method.
_________________
|
||
| Top | |
||
| W0rp3D |
|
||||
|
Here is a little diagram to show where the purple and blue wires go and all the others, the diagram is from the back of the plug that goes onto the ef\el mirror switch.
_________________
|
||||
| Top | |
||||
| Who is online |
|---|
Users browsing this forum: No registered users and 44 guests |
