Fordmods Logo

what exhaust for turbo v8 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: what exhaust for turbo v8
Posted: Thu Jan 01, 2009 4:44 pm 
Getting Side Ways
Offline
User avatar

Posts: 686

Joined: 11th Sep 2008

Location: Melbourne
VIC, Australia

will a single 3inch exhaust flow enough for a twin turbo v8?
i have the el twin system at the moment but the muffler is leaking beyond repair and i am turboing it after summer. I want to drive my car for summer but it sounds s**t with the leaking exhause. some options i have considered are
- cut the muffler out myself and put pipes in place. This will be a nice cheap fix but im scared iwill sound s**t and run crap having no muffler and just pipe out to the tips???? can anyone give me their opinion,

- get single 3 inch system fitted now and hopefully it will be adequate for my turbo setup?? opinions?
Top
 Profile  
 
 
Posted: Thu Jan 01, 2009 4:59 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 4304

Joined: 5th Nov 2004

Gallery: 9 images

Ride: EF Falcon XT-T

Location: Mornington Peninsula
VIC, Australia

how much power are you aiming for with the TT setup?

 

_________________

FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw
DTHWGN - EA GL Wagon, LTD Interior, Satin Black, 5.0, Turbo
RACER - EF Futura , 5.0, 5 Speed
PROJECT - 83 Thunderbird, Lowered, 18" Billet Wheels
DAILY - BA Fairmont Ghia 5.4 3V

Top
 Profile  
 
 
Posted: Thu Jan 01, 2009 5:06 pm 
Getting Side Ways
Offline
User avatar

Posts: 686

Joined: 11th Sep 2008

Location: Melbourne
VIC, Australia

nothin huge. i want reliability
Top
 Profile  
 
 
Posted: Thu Jan 01, 2009 5:18 pm 
Getting Side Ways
Offline
User avatar

Posts: 686

Joined: 11th Sep 2008

Location: Melbourne
VIC, Australia

id be happy to weld in some pipes instead of the muffler but dont want it to run or sound s**t??? how do v8 run with no mufflers. ive never heard one with full pipe exhaust.
Top
 Profile  
 
 
Posted: Thu Jan 01, 2009 6:05 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

With 3" single / Twin 61mm Precision turbo's on 330 windsor we made 370 rwkw.. We replaced the exhaust from turbo back with twin 3" with no muffler . We made a box with 2 x3" inlet and outlets as you cannot buy this type of muffler.. With another tune we made 482 rwkw with new injectors and another 044 fuel pump..
Here is a clip of it idling.. It acually gets quieter as rpm increases..

http://s4.photobucket.com/albums/y146/E ... CF0237.flv

http://s4.photobucket.com/albums/y146/E ... 0239-1.flv

Here is an idle clip.. These are both from cold engine..
The above clip shows some smoke.. Its due to the way i'm reving engine then closing quicky.. In these situations they will run rich..
A single 3" all thats required with std block.. Though if you can? A 3 1/2 dump pipe off turbine to cat will assist spool... 3" from cat back would be fine!!
[url=http://s4.photobucket.com/albums/y146/EBXR8240/?action=view¤t=DSCF0237.flv]Image[/url]

Here is both single and twin 3" exhaust on floor ..
Yes you can run twin singles down one side!!
Some clearanceing was done to rear bumper..
Image

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Last edited by EBXR8380 on Sun Jan 04, 2009 3:57 am, edited 4 times in total.

Top
 Profile  
 
 
Posted: Fri Jan 02, 2009 9:47 am 
Getting Side Ways
Offline
User avatar

Posts: 686

Joined: 11th Sep 2008

Location: Melbourne
VIC, Australia

howmuch did the twin system cost you?
Wouldnt have the single system stil?
Top
 Profile  
 
 
Posted: Fri Jan 02, 2009 10:27 am 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

eboost wrote:
howmuch did the twin system cost you?
Wouldnt have the single system stil?

The twin 3" cost me $350 in parts and flanges.. We did it ourselves..
The old 3"s on my sons car..
Image

Image

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Fri Jan 02, 2009 12:20 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 5881

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: 2021 Amarok V6

Location: Port Lincoln
SA, Australia

EBXR8380, the photobucket video links arent working?

 

_________________

2021 V6 Manual Amarok - 245kw/750nm - many goodies
1997 EL Fairmont Ghia 4.0 - Heritage Green & Cappa
2010 Suzuki GSX650F - when I want to be silly

Top
 Profile  
 
 
Posted: Sun Jan 04, 2009 4:00 am 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

alfy wrote:
EBXR8380, the photobucket video links arent working?


Yea pita .. I added a couple of links..

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 8:53 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names