|
DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
Hello, I'm in the process of installing an AU series 1 tickford motor into a car it doesnt belong in.
I'm using a series 1 ECU that has the smartlock rather than the smart sheild. Now, the main things im chasing is which pin the fuel pump control is, and which pin the smartlock signal is. Cheers David.
_________________ If you're not driving a manual, you are only steering... |
|||
Top | |
fourL6 |
|
|||
|
have a look through this...
might have what your after... {DESCRIPTION}
_________________ Was - {DESCRIPTION} |
|||
Top | |
DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
Cheers, thats what im chasing, but i am unable to read it, its too blurry..
I've been told that they're the same as EF as well. theres plenty of info on the 60pin ECUs but not much on the 115pins..
_________________ If you're not driving a manual, you are only steering... |
|||
Top | |
snap0964 |
|
|||
|
Have a search through the links in http://www.fordmods.com/forums/viewtopic.php?t=72417 .
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
ok, so it seems that fuel pump control is pin 80, but what pin is the smartlock??
_________________ If you're not driving a manual, you are only steering... |
|||
Top | |
DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
unless im correct in assuming that pin 3 'engine enable' is smartlock?
_________________ If you're not driving a manual, you are only steering... |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 27 guests |