Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

exhausts? 

 

Page 1 of 1 [ 8 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
ausedwagon
 Post subject: exhausts?
Posted: Tue Jan 13, 2009 12:33 pm 
VIC Cruise Moderator
Offline
User avatar

Age: 34

Posts: 1157

Joined: 6th Jan 2009

Gallery: 12 images

Ride: ed

Location: Mooroolbark
VIC, Australia
whats the differences with the sedan Ute and wagon exhausts and can the be modded or just bolted in even if they fall short?

 

_________________

94 White ED Wagon
eaton M112 supercharger, lowered a tad, extractors, 2.5" exhaust, T5 , custom SureCam supercharger cam, 3.45 lokka, 2 piece tailshaft, poyair bags in the back, TSS front Skirt, Sprint skirts, XR wagon spoiler.
soon to get: AU diff, upc 330mm brakes, Vapor LPG injection.
Top
 Profile  
 
 
BenJ
Posted: Tue Jan 13, 2009 1:08 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia
Well, I had a redback 2.5 on my sedan, and I have just purchased and installed redback 2.5 on my wagon. The centre piece from the cat to the diff is the same in both the sedan and the wagon. The tail pipes, over the diff and out the back, are unique to each vehicle.

Re the utes, I don't know.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L
Top
 Profile  
 
 
ausedwagon
Posted: Tue Jan 13, 2009 1:23 pm 
VIC Cruise Moderator
Offline
User avatar

Age: 34

Posts: 1157

Joined: 6th Jan 2009

Gallery: 12 images

Ride: ed

Location: Mooroolbark
VIC, Australia
what if i fun a dump pipe? is that vic-roads legal? can it be done?

 

_________________

94 White ED Wagon
eaton M112 supercharger, lowered a tad, extractors, 2.5" exhaust, T5 , custom SureCam supercharger cam, 3.45 lokka, 2 piece tailshaft, poyair bags in the back, TSS front Skirt, Sprint skirts, XR wagon spoiler.
soon to get: AU diff, upc 330mm brakes, Vapor LPG injection.
Top
 Profile  
 
 
BenJ
Posted: Tue Jan 13, 2009 2:18 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia
Yes, it can be done. But there is an ADR that specifies the exhaust exit points, so you will need to comply with that.

I would be quite concerned with drone in a wagon with a dumped exhaust.

My exhaust only cost $260 complete, so I don't think there is a good reason not to do it right.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L
Top
 Profile  
 
 
ausedwagon
Posted: Tue Jan 13, 2009 2:37 pm 
VIC Cruise Moderator
Offline
User avatar

Age: 34

Posts: 1157

Joined: 6th Jan 2009

Gallery: 12 images

Ride: ed

Location: Mooroolbark
VIC, Australia
that with extractors?

 

_________________

94 White ED Wagon
eaton M112 supercharger, lowered a tad, extractors, 2.5" exhaust, T5 , custom SureCam supercharger cam, 3.45 lokka, 2 piece tailshaft, poyair bags in the back, TSS front Skirt, Sprint skirts, XR wagon spoiler.
soon to get: AU diff, upc 330mm brakes, Vapor LPG injection.
Top
 Profile  
 
 
BenJ
Posted: Tue Jan 13, 2009 2:57 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia
Nope, Cat Back

I scored Pacemaker extractors and modded high flow cat off ebay second hand for $237.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L
Top
 Profile  
 
 
ausedwagon
Posted: Tue Jan 13, 2009 3:11 pm 
VIC Cruise Moderator
Offline
User avatar

Age: 34

Posts: 1157

Joined: 6th Jan 2009

Gallery: 12 images

Ride: ed

Location: Mooroolbark
VIC, Australia
ok just an off topic question u wouldn't know what causes a gas converter to leak coolant? (thread in lpg) its sorta worrying me its only just started but i wanna know why or what i can do

 

_________________

94 White ED Wagon
eaton M112 supercharger, lowered a tad, extractors, 2.5" exhaust, T5 , custom SureCam supercharger cam, 3.45 lokka, 2 piece tailshaft, poyair bags in the back, TSS front Skirt, Sprint skirts, XR wagon spoiler.
soon to get: AU diff, upc 330mm brakes, Vapor LPG injection.
Top
 Profile  
 
 
BenJ
Posted: Tue Jan 13, 2009 4:05 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia
I am only new to LPG myself. I would guestimate however, that either the coolant fittings are leaking, where the hoses go into the convertor, or the internal seals are buggered.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 8 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: Google Adsense [Bot] and 75 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 29, 2024 12:41 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names