hey guys,

Just wondering in your boosted setup's what sort of engine management did you go with.. i was looking at e-manage but 4.9 told me that it possible wouldnt work properly..
what have you guys used/done.. i want to get a good unit and like most i dont want to spend thousands..

thanks.. any info would be appreciated

The EMS Stinger or 8860 would probably be the pick of cheap aftermarket systems. Lots of features for the price. Haltech, Wolf and Motec are other common systems but cost more.

Stinger is under $1k but I'd go for Ems 8860 or E11 Haltech both cost about $2500 fitted and tuned..Remember if you want to pass emissions the sequential tuneing in these ecu's is what will get you through with hi flow injectors....You'd be p****d if you had to buy another ecu just to pass emissions....
We have turbo'd an MX6 with 880 cc injectors and it idles as smooth as..Remember this a 2.5 litre and six injectors...The 8860 handled them well...But it's best to talk to your tunner.No point in him fitting an ecu that he's not 100% sure about...
In Sydney www.justenginemanagement.com [talk to Adam] is where Michael and I go...He tunes on reliabilty side rather than performance.. We are talking turbo engines remember ...

Mine is Wolf 3D and i think the guy charges approx $2,500 installed.