|
| julzilla |
|
||
|
I just cant seem to get the caliper off to get the rotor off, the bolt it stuck and i have broken two 15mm sockets and used half a can of CRC!! does anyone have some suggestion to get this bugger of a bolt off!?
|
||
| Top | |
||
| Nigel |
|
||
|
Good half-inch sockets (impact even), and a good breaker bar.
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
your bolts are prolly gonna snap when by the time you get these calipers off. So i suggest you have a back up plan to be able to get around to get some parts you are prolly gonna need.
I had the exact same issue on my old EL. Impact Sicket and breaker bar was the solution, brok 2 bolts and the slider was jammed solid.
_________________
|
|||
| Top | |
|||
| shannonwulff |
|
|||
|
aaand when you take the rotor off, release the handbrake before you get mad and break something...
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| julzilla |
|
||
|
thanks guys i will try this although i dont have impact socket. plus i havent been using a 1/2 inch sockets either....maybe this is the problem, i shall give this a go and report back when i have finished
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 143 guests |
