|
| wazzab4 |
|
||
|
I have a Central door locking problem when i lock the car it goes back again.
I have checked the following doors are closed Interior light is off Replaced the BCM Replaced the Driver side door motor. I was wondering if i can disconect some wires to stop the motors coming back up again, then all currently go up and down fine an sometimes does lock just not all the time. Has anyone else done this Before some help would be great. Thanks Warren |
||
| Top | |
||
| xfpaul |
|
||
|
one of your door trim buttons is on the rod to far, it bounces, check a manual how to remove them and the correct way to put them back on
_________________ NC2 Fairlane AU2 Intech 4.0 Wolf V500 ECU Accel 500cc Injectors Eaton M90 Blower MPx Porting 75mm Mustang TB Intercooler Holley 255lph EL XR6 Rear End 3.45 LSD Duel Fuel lots more. |
||
| Top | |
||
| wazzab4 |
|
||
|
Good guess yes but i do not have door trims on so thats not it.
going to try 4 new motors and see if that fixes it if it does not then i would say its a wiring problem between one of the motors in which i we replace them Aftermarket ones and hope that fixes it. |
||
| Top | |
||
| wazzab4 |
|
||
|
It was the Passenger side Motor.
All fixed final now to put the car back together. Dam i hate cars some days. Today is a good day it's going again. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 86 guests |