|
| Bsjenko |
|
|||
|
Hwre can i get one of the loccating pins on the cam? the one off my old cam was well and truely jammed in there, and my new one didnt come with one.
I have been ringing repco, fraud,a nd palces like that. and i havent come across anyone who stocks them as yet. so any help? cheers BEN
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
id be getting onto your local performance shop... or maybe an engine recon/ builder may have one?
-mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| banarcus |
|
|||
|
Just measure your dowell pin on your old cam and measure the depth of the hole in the cam, find out the length, and diameter and buy one from a bolt shop. I had to buy dowell pins for my new flywheel as the scumbags never gave me any.
If measuring the diameter is too difficult ie you have no micrometers/verniers, get your cam wheel and take it with you when you go shopping. |
|||
| Top | |
|||
| Jaysen |
|
|||
|
make sure that your new dowel is long enough as my E303 wasnt when I got it, and Im glad I checked it as it only went in to the cam gear by an 1/8", and I would prefer to not have had to fix bent valves
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| XR9UTE |
|
||
|
I'd get onto whoever sold you the cam and get the dowel it's supposed to have in it already. I wouldn't accept a cam that didn't have one in it.
|
||
| Top | |
||
| Bsjenko |
|
|||
|
Righto fellas, just in case someone else looks for one. i finally found it after all this time!
I got mine through crane cams for $15, comes with stock size and extended size for E303 cam. Thank christ thats over, cheers for the help. Bsjenko
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
