i have a alpine 4 channel amp and a mono block and 2 subs, the problem im having is my deck only puts out 1 rca output so at the moment ive split the rca so 1 set goes to the mono and one set goes to the 4 channel the 4 channel already has my back speakers running of channel 1-2 , is there any way i can get this second sub to run ??
cheers

you should be able to split the rca's again at the 4 channel. The only problem is you will have to set everything (fader) up via the gains, but still better than nothing.
Are you planning to get a deck with 3 pre-outs sometime in the future? If so, i would split them twice at the deck and run 3 sets of rca's now. This would save pulling everything apart later to run more rca's.

yer later on i will get a 3 pre out deck but i did try to split them again and the power jus died in the a** tbh nd i jus decided to leave it, it sounded alot better before i thought it would hav been ok to split the rca again since its a low current/voltage so yer

You need a high quality RCA splitter lead ( axis / Stinger )
To get the volume to stay right you need to wire in sterio L & R mode to all amps
I can Help
Car Audio page @
http://www.autowreck.com.au

Parrot
22 years in car audio instalation
http://www.rlsnell.20m.com
http://www.autowreck.com.au
http://z3.invisionfree.com/APV/index.php?
http://www.youtube.com/user/parrotscaraudio

 

 

Attachments:

File comment: These are Awsome Stinger quality NOT stinger price InstallNeeds22.jpg [ 69.73 KiB | Viewed 200 times ]