|
XeTurbo |
|
|||
|
Im just wondering if you guys knew of any reputable turbo suppliers in Australia or some international ones. I am in the market for a T 76 turbo as a minimum, and i want to start getting some prices so i can budget for one. I have spent some time on turbo mustangs and i have basically the knowledge to now start getting serious. my only problems i can see arising are getting a big enough gas carby, and room to run a 3.5 inch dump pipe, as anything smaller causes to much backpressure on an engine of my displacement. (also there a few turbocharged 400 getting around the states, and they have helped me significantly)
|
|||
Top | |
old_mate |
|
|||
|
GCG here in Sydney. www.gcg.com.au
_________________ too many rabbits in china |
|||
Top | |
EBXR8380 |
|
|||
|
Yes check the single turbo thread on junk yard section also on T.M...
And the Mopar section where there motors are all around 400 ci or bigger... Another place is Precision Turbo's in Smithfield 02 97565757 e http://www.turbomustangs.com/forums/for ... forumid=15 http://www.turbomustangs.com/forums/for ... forumid=21 http://www.corral.net/forums/forumdisplay.php?f=312 Try these guys I was talking to a salemen..As usual said he could have got me good price's... http://www.mtqes.com.au/index.htm http://turbotech.com.au/garrett4.htm http://www.turbofast.com.au/sales.html http://www.turbonetics.com.au/
_________________ As in ZOOM 126 edition |
|||
Top | |
XeTurbo |
|
|||
|
thanks mate, i appreciate your time to gather those websites for me. as for gcg.com.au i couldnt really find anything bigger then a t70?
|
|||
Top | |
EBXR8380 |
|
|||
|
Yes that site is not as informative as it used to be...
Check power levels ? not nessesary turbo size... You'll have to ring them, they can change a few things and set up to your engine..As specs can be fairly generic and bassed on Nissan or existing turbo engines... A GT 42 would be way awsome, some lag though.. They have housings up to 1.75 A.R Graeme...
_________________ As in ZOOM 126 edition |
|||
Top | |
XeTurbo |
|
|||
|
I have been out emailing a few places asking for their reccomendations on turbo size etc. From what i can gather i am looking roughly at $2500 to purchase a turbo, which for me seems pretty good. Although when you add it up, supercharging using a vortec or something comes very close too. I feel supercharging is taking the easy root! and im pretty keen to go turbo to be different.
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 28 guests |