|
| EFNA |
|
|||
|
realised the other day, that my odometer isnt working, anyone know if there is a fuse for it or a possible cause for the fault? the trip reader doesnt work too if that helps
_________________ AU FAIRMONT GHIA: 5.0 Dealer ordered SVO mods ( seeking clarification ATM), tickford suspension. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
The speedo has a gear inside it that goes brittle and breaks. You need to go to a place that fixes speedos and get a new gear fitted in it or go to a wreckers and get a gear out of a known working speedo and replace it. Pulling the cluster apart to fix it is pretty easy but also fiddly. Its very common and usually happens when you give a hard press of the trip reset button.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| EFNA |
|
|||
|
so who would i go too to get it fixed, ordinary mech or do i have to take it too a specialist?
_________________ AU FAIRMONT GHIA: 5.0 Dealer ordered SVO mods ( seeking clarification ATM), tickford suspension. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Not sure where you can go in canberra but alot of wreckers can sometimes do it for you,some will try sell you a whole cluster and entice you to buy it because it has less kays. You will need to research in your area for a speedo repair shop or if you get desperate go to a self serve wrecking yard and practice on an old cluster there first
 .Ive replaced mine and the fiddliest thing is getting the unit apart and back together without scratching the faces or damaging the dials. you also need a torx screwdriver to open the cluster. might be a T8 but not 100%.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| swoody19 |
|
|||
|
if u look in your yellow pages for a gauge/instument specialist (theres 2 in newy) you should be right. I pulled my cluster out and they charged me $50 to pull in apart and replace the gear with a brand newy.... your definitley not alone, it happends all the time
|
|||
| Top | |
|||
| Dr_Hoon |
|
||
|
DIY in Street Fords magazine about this in issue 51 w/ photos, guide, etc. out 04/03
We did it for my ED. It is very easy to do. Gears for sale on ebay. Take the cluster out, remove back panel, remove speedo a***/assembly, see the squishy gear, remove and replace, fit in reverse order.
_________________ BF XR6 Ute,ED XR6 Manual (SOLD),XD 4V 351 toploader 9in |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 41 guests |
