|
| eric eb |
|
||
|
new srp forged pistons to suit 331 stroker with trick flow heads $1400
new eagle crank to suit $400 new H beam rods forged with arp 2000 rod bolts $650 new crank girdle with arp main studs $300 used track heat heads with 1.7 ratio rockers and push rods $2500. used 75mm edlerbrock throttle body $200 Last edited by eric eb on Mon Feb 23, 2009 1:06 pm, edited 1 time in total. |
||
| Top | |
||
| sam12h |
|
|||
|
Hi.
Is that's $400 for the upper and lower manifold? And are all the ports still their original size? (ie. not ported?) Also, do you have bigger/better pics of the cam? If you don't want to post them up could you email them to sam12h@hotmail.com. Cheers.
_________________ Production Editor of Performance Motoring at Express Media Group |
|||
| Top | |
|||
| eng-fnm |
|
||
|
{USERNAME} wrote: new srp forged pistons to suit 331 stroker with trick flow heads $1400 new eagle crank to suit $400 new H beam rods forged with arp 2000 rod bolts $650 new crank girdle with arp main studs $300 used stage 1 trick flow cam $150 used track heat heads with 1.7 ratio rockers and push rods $2500. used track heat manifold $400.00 used 75mm edlerbrock throttle body $200 What was the T/B off ? And is it a direct plug into an ED 5.0 ? if so would be keen if there was need to modify the tps mount. |
||
| Top | |
||
| bro_ebxr8 |
|
|||
|
hey how much for the 331 stroker kit?
cheers
_________________ 1992 EBII S XR8: 2.5" Exhaust, Ported GT40P Heads, GT40 Intake Manifold (Both Port Matched), 70mm T/B, 75mm MAF , Custom CAI, 1.7 Roller Rockers, Tweecer, Crane 2031 Camshaft, Crow Valve Train, Pacemaker Headers and Shift Kit |
|||
| Top | |
|||
| eric eb |
|
||
|
{USERNAME} wrote: hey how much for the 331 stroker kit? cheers the crank rods pistonsnad crank girdle with bolts $2750 plus postage |
||
| Top | |
||
| eric eb |
|
||
|
[quote="sam12h"]Hi.
Is that's $400 for the upper and lower manifold? And are all the ports still their original size? (ie. not ported?) Also, do you have bigger/better pics of the cam? If you don't want to post them up could you email them to sam12h@hotmail.com. Cheers.[/quote yes that is for the upper and lower the ports are standard |
||
| Top | |
||
| eric eb |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: new srp forged pistons to suit 331 stroker with trick flow heads $1400 new eagle crank to suit $400 new H beam rods forged with arp 2000 rod bolts $650 new crank girdle with arp main studs $300 used stage 1 trick flow cam $150 used track heat heads with 1.7 ratio rockers and push rods $2500. used track heat manifold $400.00 used 75mm edlerbrock throttle body $200 What was the T/B off ? And is it a direct plug into an ED 5.0 ? if so would be keen if there was need to modify the tps mount. it was of my eb falcon to fit you will need to fit a universal cable mount to the throttle shaft easy to do |
||
| Top | |
||
| sam12h |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Hi. Is that's $400 for the upper and lower manifold? And are all the ports still their original size? (ie. not ported?) Also, do you have bigger/better pics of the cam? If you don't want to post them up could you email them to sam12h@hotmail.com. Cheers. yes that is for the upper and lower the ports are standard Awesome. You have a PM.
_________________ Production Editor of Performance Motoring at Express Media Group |
|||
| Top | |
|||
| eng-fnm |
|
||
|
What was the T/B off ? And is it a direct plug into an ED 5.0 ? if so would be keen if there was need to modify the tps mount.[/quote]
it was of my eb falcon to fit you will need to fit a universal cable mount to the throttle shaft easy to do[/quote] If it came off the EB, wouldn't the TPS sensor still be the same ? |
||
| Top | |
||
| eric eb |
|
||
|
that correct the sensor is the same also have the egr spacer to suit if needed
|
||
| Top | |
||
| Scaffy |
|
|||
|
Are those pistons 4.030"? If so, can you please send me the specs?
What power were you making with the track heat kit?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| eng-fnm |
|
||
|
{USERNAME} wrote: that correct the sensor is the same also have the egr spacer to suit if needed S\orry last question mate, did your EB have cruise ? Not sure if that change the tps sensor or linkage location of the top of my head. Thanks Last bumped by eric eb on Mon Feb 23, 2009 1:10 pm. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 58 guests |
