|
Johnson stroker |
|
|||
|
Hey all, no search feature yet, so forgive me.
what does a XR6T injector flow? Stock EB jobs are 19lb right? Stock AU are 19lb right? but a better spray pattern, looking to increase flow to keep up with boost. dave
_________________
|
|||
Top | |
a1drake |
|
|||
|
hey i think there about 32 lb iam going to run them in my eb with e85 green race fuel u can get bigger injectors 4 turbos 45lb but i dont know if they will run in a standard 4.0 l non turbo, i might give them ago in the race car
_________________ eb 4.0 falcon & f150 351 & caprice 5.0 |
|||
Top | |
Steady ED |
|
|||
|
dc_todd wrote: Hey all, no search feature yet, so forgive me. what does a XR6T injector flow? Stock EB jobs are 19lb right? Stock AU are 19lb right? but a better spray pattern, looking to increase flow to keep up with boost. dave Same as a non turbo BA 6, the Ts just run more pressure. It's been covered a few times, but with the search still a bit d**k I can't find it either. So from memory they are like 27lb/h @ 3.50bar in non turbo guise and 32lb/h @ 4bar in the turbos? They have a wider spray pattern for the DOHC head, there was talk on another forum about possible negatives of having the fuel hit the port wall, I don't know enough about it personally to say yay or nay. If it was pre-economic crash I would probably just buy some bosch 36 or 42lb/h injectors which don't have the wide spray pattern and do that flow at 3bar, but I'm guessing cost has risen a fair bit since I got mine when aussie dollar was like 98c to the USD
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
Johnson stroker |
|
|||
|
the injectors will be going in a turbo EB, I've looked at the 60lb deka's but not prepared to have the option to pump that much fuel into the motor, cause I will use it and break something.
Only looking for something with a bit more flow than the stockers.. maybe some 24lb'ers.. from an AU right? Dave
_________________
|
|||
Top | |
Mr Man |
|
|||
|
BA XR6 Turbo injectors are rated at 29lb.
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD * |
|||
Top | |
Waggin |
|
|||
|
dc_todd wrote: the injectors will be going in a turbo EB, I've looked at the 60lb deka's but not prepared to have the option to pump that much fuel into the motor, cause I will use it and break something. You're far more likely to break things with not enough fuel
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
Top | |
Rick's EF Fairmont Wagon |
|
||
|
yep too lean and you blow holes in the top of pistons
_________________ BF3 Egas XT Wagon |
||
Top | |
Johnson stroker |
|
|||
|
I know but if I am conscience of the fact of what my fuel system threshold is and do not exceed it, then there will be otherthings that do not break.
Not trying to be cheap, just trying to stick to a realistic budget for this build. If I can avoid the expence of $6 or 700 worth of injectors I will.
_________________
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 39 guests |