Fordmods Logo

block swap? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: block swap?
Posted: Mon Feb 02, 2009 8:35 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 5

Joined: 2nd Feb 2009

Ride: ford au

Location: boronia
VIC, Australia

hello i have an au series 2 302 and i allso have a 347 bottom with cam and all the jazz and was wondering if it would be pretty much a straight swap of blocks, stock heads will go on it i no i need a flash tuner but is there any else i mite need?? In the way of tuning could i do most of it myself or just get someone to do? any idieas of price just to tune? thanx dwayne
Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Mon Feb 02, 2009 8:43 pm 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 1887

Joined: 26th Nov 2006

Gallery: 7 images

Ride: EL XR8, '08 Mondeo XR5t

Power: 205 rwkw

Location: Perth
WA, Australia

It'll all swap over, but a set of bigger imjectors, larger maf and throttle body would do it wonders.

 

_________________

Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20

When injustice becomes law, resistance becomes duty

Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Mon Feb 02, 2009 9:01 pm 
Tyre Shredder
Offline
User avatar

Age: 38

Posts: 325

Joined: 15th Apr 2006

Ride: F350, EF2 Ghia, XC & Corty

Power: 218 rwkw

Location: Wangaratta
VIC, Australia

Just make sure that the 347 is externally balanced to suit the 50oz. balancer and flywheel.
Otherwise your may have trouble sourcing a flexplate...

 

_________________

13.28@103.73mph

Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Tue Feb 03, 2009 4:14 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 5

Joined: 2nd Feb 2009

Ride: ford au

Location: boronia
VIC, Australia

Thanx its been blueprinted and what's a maf? How far could I go tuning it myself?
Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Tue Feb 03, 2009 6:12 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

Maf is air flow meter.. Or Ma** Air Flow..
Mass is not a swear word??

Copy what Tickford did to the TE50...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Thu Feb 05, 2009 3:17 am 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 1887

Joined: 26th Nov 2006

Gallery: 7 images

Ride: EL XR8, '08 Mondeo XR5t

Power: 205 rwkw

Location: Perth
WA, Australia

{USERNAME} wrote:
Thanx its been blueprinted and what's a maf? How far could I go tuning it myself?


You could go a long way if you spend the time educating yourself and getting a good understanding of how everything works.

 

_________________

Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20

When injustice becomes law, resistance becomes duty

Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Fri Feb 06, 2009 6:02 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 5

Joined: 2nd Feb 2009

Ride: ford au

Location: boronia
VIC, Australia

do you think it will run good enough with the stock comp to get it to a dyno place or should i just get it put on a tilt tray?
Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Fri Feb 06, 2009 6:08 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 5

Joined: 2nd Feb 2009

Ride: ford au

Location: boronia
VIC, Australia

do you think it will run good enough with the stock comp to get it to a dyno place or should i just get it put on a tilt tray?
Top
 Profile  
 
 
 Post subject: Re: block swap?
Posted: Sat Feb 07, 2009 2:02 am 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 1887

Joined: 26th Nov 2006

Gallery: 7 images

Ride: EL XR8, '08 Mondeo XR5t

Power: 205 rwkw

Location: Perth
WA, Australia

I'd throw it on a tilt tray

 

_________________

Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20

When injustice becomes law, resistance becomes duty

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 31, 2024 7:00 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names