|
| EFford |
|
||
Age: 38 Posts: 75 Joined: 22nd Dec 2005 Ride: 95 EF XR8 & a 09 FG GT Location: Rockingham and Port Hedland |
hey all, I am trying to remove the air con belt on a 89 EA Falcon 3.9 lr CFI model car, how on earth do you do it?, I removed the idle tension pully for it but it seems impossible to remove the belt?? there is nothing else I can find to release tension, I remember I could not get it on, some one else done it, but have no idea how it was put on, but now I cant remove it any ideas??, and no idiot comments please, i.e don't tell me to cut it.......
urgent reply if possible, thanks for the help... Aaron |
||
| Top | |
||
| SpeedyED |
|
|||
|
on the Idle Tensioner there should be 2 sets of nuts, a small one and a big one, the big one is about a 24mm socket, I use a spanner, turn that anti-clockwise and it should come off.
I have an ED, so I don't think much would have changed on the aircon from your model to mine, but someone else with a 3.9 CFI EA might be able to comfirm...
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| EFford |
|
||
Age: 38 Posts: 75 Joined: 22nd Dec 2005 Ride: 95 EF XR8 & a 09 FG GT Location: Rockingham and Port Hedland |
yeah mate ive done that already the idle pully is completely off, I can't get the belt over the crank or air con compressor to get it off at all its as if the belt is too small or shrunk but im sure thats impossible???
|
||
| Top | |
||
| SpeedyED |
|
|||
|
Take some photo's of it, it will help us see exactly what the problem is, it sounds like the belt itself is too small....
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| EFford |
|
||
Age: 38 Posts: 75 Joined: 22nd Dec 2005 Ride: 95 EF XR8 & a 09 FG GT Location: Rockingham and Port Hedland |
yer thats what I thought too mate, i got one that actually was too small, so i got another one the right part number, but I did not put it on, but now it seems like it is too small and won't come off, even if it was too small, then I don't think it would fit on at all to begine with???
its got me stuffed aye.. |
||
| Top | |
||
| SpeedyED |
|
|||
|
So if I'm thinking correctly, with the idler pulley completly off, the belt is that tight that it doesn't look as if it needs the idler pulley at all???
Do you know what model Air Con you have attached to that car??? might be worth a pic or 2 of the belt, and the aircon.
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| Damo |
|
|||
|
Just cut it off. You're also going to need to remove the other two belts in order to get the new one on.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: andryt and 137 guests |
