|
| reded |
|
||
|
hey guys, i have an ED falcon auto I6 with pacemaker 44880's and full 2.5" exaust and i want to start working on the engine a bit more, want to start with a cam but not sure what cam to get as i've been told dont get one too lumpy or it will stall all the time,
just want to know what kind of cams you guys are running and how lumpy they are? and what oe is best.. cheers troy
_________________ 1994 ED Falcon
|
||
| Top | |
||
| Hotka |
|
|||
|
Read the stickys at the top of the 6 cylinder workshop page they will help you out.
Also this topic has been put thru here a few times just go thru a few pages on youll find what you need. 
_________________ HOTKA'S XR Last edited by Hotka on Mon Feb 23, 2009 1:40 pm, edited 1 time in total. |
|||
| Top | |
|||
| Shortshift |
|
|||
|
Have you read through the Crescent Motor Sport & Wade forums? There's a lot of feedback on what different grinds do. If you're on a budget, consider a reground cam from Wade.
The main thing to consider is where you want your engine power most. Low, mid range or high? As a starting point, consider the Wade 1636. It's suited to auto transmissions and doesn't require any changes to the stock ECU. You would also need 1.9mm shims under the HLAs to compensate for the metal ground off the cam lobes. CMS also do a Stage 2 grind which is excellent, but they're in Sydney.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| finnigan001 |
|
|||
|
have a look at this link -> ford-4l-and-6-cylinder-f1/1604-cam-t75403.html
couple of testimonies in there. and also look at the cam spec list in the stickies. might give you a better idea of what your after.
_________________ 1995 EF Futura |
|||
| Top | |
|||
| bushman |
|
|||
|
bugger the cam for now save your money and i mean save.
get a blower then get a cam with a blower specific grind. get best of both worlds i wonder wat a 4L would sound like with a custom setup 6/71 with like 700 THOU of lift on a blower cam and running meth? oh the whine oh that meth smell  and the noise oh the lumpyness of the way too big cam thats one hell of a recipe could the block handle it? anyone know an wanna tell me
_________________ THE LOOSEST MUTHA FUKA YOU'VE EVER MET |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 139 guests |
