Hey i was wondering if neone knows if it is possible to put an entire ef interior into my eb fairmont?? would it work cause i have an ef motor in my car and i use the wirin loom and computer??

I got one in mine.

EF front seats need to be moddified, the inner rear needs a little foot thing welded onto it. Just cut one off ya old seats and weld it on
Rears go straight in.

The dash will go in easy.
If you have the dash wiring it should plug in, esp considering yu have the eng wiring loom.
Although mine doesnt sit in right atm, think it may be slightly bent

You may want to do the door trims at th esame time aswell, as the EF dash is moulded to meet the door trims.
This requires you to drill new holes in the door for the door handles, and bend the wire bits that get pulled on by the door handles. You will see what i mean when u try put them on

Sorry to bring up an old post.
jase: will the door trims fit an eb without colliding with the dash before the door closes? I believe this was covered in fordmods mkI but i can't remember the answer.

they will fit perfectly.

kewl i'll be doing that then. hate the eb trimss...

bugger that! just buy an EF save the trouble