|
| xr6eat 50 |
|
|||
|
Hi wondering if anyone knows what the Ohms of the fuel sender at empty and full in a 95 XR6? Thought I would ask before I do the hard yards and take the tank out and measure the ohms of the sender!
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
0-176ohms
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| EL__Fairmont |
|
|||
|
If you put the dash in diagnostic mode it will give you the ohms reading of the sender unit, just the same as disconnecting the sender plug on top of the fuel pump and measuring it with a multimeter.
Also you don't need too drop the tank out to remove the fuel pump/sender unit.
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
The procedure is in the docos on here - there are two readings, buffered and raw reading - you'll want the latter.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| xr6eat 50 |
|
|||
|
Thanks alot guys saves me the ordeal.
 I will have to read that doco on diagnostics, I have tried to put my dash into that mode once with no success.
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
