|
| alfy12 |
|
|||
|
Don't know if I would worry about a high performance replacement. Other coils (LS1) may have a different amount of inductance and this could damage you output driver stage in your ecu. I would just contact inject-a-carb and spend $86 + freight on one that is designed for an EF/AU. Also good plugs and leads if they haven't been done recently.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| djcustomcomputing |
|
|||
|
im thinking ill get a coil pack from screamin deamon
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
Sorry to hijack your thread but does anyone know any to suit EF? Was looking into the screaming demon ones and if part number 31737 works on AU does anyone think the 31736 would work on the EF's heres a link to one they look similar and the input plug looks to be the same. What do you guys think.
Quote:
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| Waggin |
|
|||
|
From memory BPT sell the screamin demon coils.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| alfy12 |
|
|||
|
Should be no dramas as the replacement standard coil packs on the site I mentioned above are for EF/AU.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Sloxr6 wrote: Sorry to hijack your thread but does anyone know any to suit EF? Was looking into the screaming demon ones and if part number 31737 works on AU does anyone think the 31736 would work on the EF's heres a link to one they look similar and the input plug looks to be the same. What do you guys think. Quote: you would need to buy some AU11 / AU111 leads to use that coil on an EF. all of this thread has been covered before. a couple of times. |
||
| Top | |
||
| djcustomcomputing |
|
|||
|
if its been covered before then can you post a link
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
ford-4l-and-6-cylinder-f1/ef-and-au-after-market-coils-your-options-t62611.html
there is a second thread aswell. but someone other then me can search for it for a change |
||
| Top | |
||
| djcustomcomputing |
|
|||
|
thanks great info
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| djcustomcomputing |
|
|||
|
excuse my ignorance but what is the difference in the coil side of the plug between au1 and au3
is it a diff size?? its just i rearry dont feel like buying new leads aswell? can i modify the lead plug??
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 87 guests |
