|
dregg69 |
|
|||
|
I will be putting my scanner in my car VERY soon, just need to pick up the z bracket, now i am wondering where is the best place to run the coax from under the bonet to inside the car?? i dont knoe exactly where the scanner will be but i dont mind where the coax comes out inside the car.Is there a nice hole coming through allready somewhere?? i cant really see one.
|
|||
Top | |
Interceptor |
|
||
|
clutch cable hole?
_________________ Banned |
||
Top | |
dregg69 |
|
|||
|
Sorry i guess i should of mentiond its an 95 ef falcon also its an auto
|
|||
Top | |
tomcolahan |
|
|||
|
yeh go clutch cable hole, its a decent size.
_________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city. |
|||
Top | |
dregg69 |
|
|||
|
ohh so there is still a clutch cable hole in autos, and where bouts is it
|
|||
Top | |
tomcolahan |
|
|||
|
if you are looking at the car from the front, it is above where the headers are, in the firewall of course. it sticks out a little way and will proabably have a black grommet in it. approximately 1cm in diameter.
from the inside the wire will come through in the upper part of the drivers footwell, just feed enough through and you should be able to spot it.
_________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city. |
|||
Top | |
dregg69 |
|
|||
|
ok no worries i will give it a go tommorow, thanks for the replys
|
|||
Top | |
joolz |
|
|||
|
its a bit harder but well hidden, try the same path as the radio antenna. thats if your mounting the scanner antenna on the passanger side.
|
|||
Top | |
ch0c0 |
|
||
|
clutch cable hole is by far the easiest way.
otherwise there you can punch a hole with a screwdriver in the wiring harness that goes thru the firewall behind where the cruise module sits. if you dont know where this is, its basically just above and to the left of the steering column. ive got 2x coax and 2x4ga running thru there, so there is plenty of room
_________________ BOOSTED |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 34 guests |