|
| AmerrikA |
|
|||
Age: 33 Posts: 121 Joined: 11th Feb 2009 Ride: 1991 XF UTE, 1990 XF PANELVAN Location: fernvale |
hey guys
i bought a eb series two wagon went to take the wheels off to find each one has a funny sort of lock nut on one of the studs any ideas how to undo the nut with out causing damage to rims thanks
_________________ Over the top over the top Right now its killin time |
|||
| Top | |
|||
| NCIILANE |
|
|||
|
Take it to your local tyre fitters mate. They'll either have one to fit it or will hit it with the airgun with a rubber socket thing they use.
Failing that a good set of stilsens will get it off......be careful though, one slip and damaged wheel  (stockies)If the wheels have recessed nuts....then I have nutthin 
_________________
|
|||
| Top | |
|||
| AmerrikA |
|
|||
Age: 33 Posts: 121 Joined: 11th Feb 2009 Ride: 1991 XF UTE, 1990 XF PANELVAN Location: fernvale |
hey mate thanx for stopping by
it has the xr6 mags on it so yer bit stuck
_________________ Over the top over the top Right now its killin time |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
i usually just find a socket that just starts to go over the nut the get a hammer and tap it on and undo with a breaker bar.
|
|||
| Top | |
|||
| Johnny C |
|
||
|
weld a nut on there if ALL else fails, this really is last resort stuff.
|
||
| Top | |
||
| AmerrikA |
|
|||
Age: 33 Posts: 121 Joined: 11th Feb 2009 Ride: 1991 XF UTE, 1990 XF PANELVAN Location: fernvale |
thanks guys well try all this tomorrow
_________________ Over the top over the top Right now its killin time |
|||
| Top | |
|||
| Krytox |
|
|||
|
moderately tighten the others first, THEN attempt to remove the locknut.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| AmerrikA |
|
|||
Age: 33 Posts: 121 Joined: 11th Feb 2009 Ride: 1991 XF UTE, 1990 XF PANELVAN Location: fernvale |
ok mate well do
_________________ Over the top over the top Right now its killin time |
|||
| Top | |
|||
| AmerrikA |
|
|||
Age: 33 Posts: 121 Joined: 11th Feb 2009 Ride: 1991 XF UTE, 1990 XF PANELVAN Location: fernvale |
hey guys
got the mags off the wagon today ended up going with elf100capri's idea and wacked a socket over the lock nut and it worked a treat thanks for everyone stopping by and posting an input have a good one guys
_________________ Over the top over the top Right now its killin time |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
i work at a wreckers and every car that comes in has mag lock nuts without the key. only found 1 set i couldnt get and i had to use a hammer and cold chisel and they came off
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 92 guests |
