I am having trouble removing the clear facia from my ED cluster. Is there a trick to getting the plastic cover off? I am afraid to prise too hard in case there is something else I need to release. I have been able to release the 4 screws holding the facia on. I have been able to loosen the four black lugs on the bottom. But still it won't come off!!!! What else do I need to do

You will need to remove the 4 from the top of the cluster and there are 4 right down the bottom of the cluster you have to remove it will come apart.

Thanks for you quick answer. Can you provide a little more info The four black lugs at the bottom were easy to prise apart. Its the top of the cluster that is giving me the grief There is a clear plastic cover (with steps) the appears to let light in. Then there is a black surround that appears to be glued to the facia I want to remove. Here there are another four lugs, but I cannot get them to open up. I dont have to remove the top clear plastic

Where the red arrows are you must remove them screws to take the cover off. Then it will come apart.

Hope This Helps Ya

 

 

Attachments:

ed gli 1.jpg [ 95.47 KiB | Viewed 193 times ]

Thanks for the photo. I did not know you had to remove the four lower screws in the middle of the back. Put the cluster back in this morning so I can drive to work tomorrow. Looks like a job for the Easter break. I hope the Easter Bunny is go to you, especially if this works. Thanks