|
| nalane |
|
|||
|
I bought a smartlock bypass about 12 months ago for an engine conversion, and now that it is done i cannot find the wiring diagram for it. Have black, red and yellpw wires and I think I remember where they go but can someone confirm them for me,
|
|||
| Top | |
|||
| Shortshift |
|
|||
|
Luckily, I have some instructions handy. If it's a Shiftkits bypass module then:
For 60 Pin ECU: Splice Red wire onto Pin 57, Green wire to new wire on Pin 4, & Black is ground For 104 Pin ECU: Splice Red wire onto Pin 71, Green wire to new wire on Pin 3, & Black is ground Red is the +ve ignition wire & Green is Data Out. Not sure what the yellow is (maybe Data Out). Hope this is some help.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| nalane |
|
|||
|
Sorry should have stated that it was a 60 pin el ecu. It is not a shift kits one, was bought off ebay, but you have given me enough info to go on
Thanks |
|||
| Top | |
|||
| nalane |
|
|||
|
bump
|
|||
| Top | |
|||
| travs ea-xr6 |
|
||
|
hi mate
here you go red wire goes to pin 57 black wire goes to pin 60 yellow wire goes to pin 4 hope that hellps ya 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
