|
| XFWAGON |
|
|||||
|
Hi guys, the ECU supplied with my T5 looks a bit dodge. It is missing the panel on the bottom and also has a tuning sticker??? where can i get the actual panel that covers the bottom or could i just swap to another ECU case?? Also in the pic is the sticker on the front, what does this mean, has it possibly been re-tuned or what? Cheers
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||||
| Top | |
|||||
| phongus |
|
|||
|
I think the ECU has been tweaked by some company
 From the label I am guessing they have done some sort of chipping...from the "virtual" testing part.The bottom bit doesn't have to be covered. It is used to diagnostics really unless you have one of them "plug and play" J3 chips. You can just put gaffer tape over it...not like you can see it once covered by the kick panel  .But the above statement regarding the sticker is just a guestimate, don't quote me on that. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Froudey |
|
||
|
or it has been reco'd?
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| alfy |
|
|||
|
Froudey wrote: or it has been reco'd? it would have a different catch code if it was reco'ed IIRC.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| alfy12 |
|
|||
|
Looks like a reco ecu (non ford) so no change in the catch code. A number of companies have simulators to test the ecu during diagnosis and final testing after repair. Thats why Bursons and other parts retailers do exchange rebuilt ecus. Your dead one gets rebuilt and sold to another customer. Usually put warranty void tape over the outer casing to stop people tampering with the rebuilt internals.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
But its still the same as the oringinal right? This was sold to me as an EB GT ecu (catch code confirms this)
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| phongus |
|
|||
|
XFWAGON wrote: But its still the same as the oringinal right? This was sold to me as an EB GT ecu (catch code confirms this) I would assume so unless the sticker is ripped or looks like it has been removed, then it may have been tampered with. Looks like you're safe though. =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| alfy12 |
|
|||
|
Can't guarantee it but I would suspect that it is an original as per the catch code. I see nothing on the repairers label to indicate anything other than a repair/rebuild and testing. The virtual part is only simulating the cars inputs and outputs for ecu functionality. I guess the only way to be sure would be to try it in the appropriate vehicle.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
Yeah, one side of the label has dried up and peeled off but the other side looks fine to me. Should get the chance to check it once i bolt my box up, as soon as i manage to find a decently priced clutch
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| sexyr6 |
|
|||
|
XFWAGON wrote: where can i get the actual panel that covers the bottom or could i just swap to another ECU case?? looks alot like its the same case as an XF..
_________________
|
|||
| Top | |
|||
| XFWAGON |
|
|||
|
Yeah thats what i thought, i compared it to my other EB one that i have here and its a completely different case, the other EB one i have here is a 6cyl type and it's case is identically to my other AU auto one. Maybe this one got dented or something, then had a repair to board and case??? i dont really care, just as long as it does its job
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| sexyr6 |
|
|||
|
XFWAGON wrote: Yeah thats what i thought, i compared it to my other EB one that i have here and its a completely different case, the other EB one i have here is a 6cyl type and it's case is identically to my other AU auto one. Maybe this one got dented or something, then had a repair to board and case??? i dont really care, just as long as it does its job being a V8 ECU, they do not include the transmission ECU, where as the 6cyl ECU's do, im guessing thats why the cases are different. the 6cyl case has more a of a heat sink than the V8..
_________________
|
|||
| Top | |
|||
| XFWAGON |
|
|||
|
oh i see, that would explain why this is like a tin shell and the 6cyl one has heaps of chunky metal around it
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| MoffatGhia |
|
||
|
umm..... i thought 2DCA was the catch code for a manual ED XR8 Sprint
|
||
| Top | |
||
| XFWAGON |
|
|||
|
MoffatGhia wrote: umm..... i thought 2DCA was the catch code for a manual ED XR8 Sprint Same thing, Both GT and sprint used the same ECU
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
