|
| fiftyone |
|
|||
|
I have the cruise control in the falcon die a few weeks ago. i havent worried to chase it up as i didnt really need it.
The other night i noticed that the brake lights arnt working. today i replaced the switch with a genuine ford one and i still have no brake lights. tail lights work fine. Any ideas if these are separate incidents or have i got gremlins in the system? ideas on what i should look to trace before sending it to an auto elec? i cant think about what else it could possibly be!
_________________ ** For Sale ** {DESCRIPTION} |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
the cruise buttons fail all the time.. i went thru about 3 sets with my fairmont..
as for the brake lights, assuming youve checked fuses and bulbs.. i would be checking for power at the tail light plugs and attempting to chase the harness back to the brake light switch. -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| alfy12 |
|
|||
|
Best thing you can do is learn how to use a multimeter and purchase one for about $10. A resistance check of your existing brake switch would have confirmed it was ok (I bet a new switch cost more than a $10 multimeter). With a multimeter you can check the condition of your bulbs, switch, fuses (resistance setting) and also check for +12v at your brake lights (DC Volts) with the help of an assistant or a large brick. Plenty of tutorials on the net on using the basic functions of a simple digital multimeter.
Also the technical documents section has an article on fitting cruise control and testing. I remember reading something about the brake switch playing havoc with cruise control operation. Makes sense as your cruise control needs the brake switch to deactivate. Good Luck
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. Last edited by alfy12 on Wed Apr 15, 2009 2:21 pm, edited 1 time in total. |
|||
| Top | |
|||
| arm79 |
|
|||
|
I take it you've checked the brake light fuse?
{USERNAME} wrote: Have to agree with mitch. Failures are unlikely to be related. They are related... So related, they would almost be twins. |
|||
| Top | |
|||
| alfy12 |
|
|||
|
Your right arm79. I don't know why I said that.
 I've even contradicted myself. I wrote:Quote: Have to agree with mitch. Failures are unlikely to be related. and then Quote: I remember reading something about the brake switch playing havoc with cruise control operation. Makes sense as your cruise control needs the brake switch to deactivate. Must have been half asleep when I wrote this one. I agree that they could even be twins and are definately related. I've edited the post and removed my stupid original comment.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| arm79 |
|
|||
|
{USERNAME} wrote: Your right arm79. I don't know why I said that. Yes I know... I usually am.  I ask about the brake fuse, as the cruise control is powered from the +ve side of the brake circuit. If that's fine, the next problem would be both brake bulbs. If they are both blown, no brake lights and no cruise control. |
|||
| Top | |
|||
| fiftyone |
|
|||
|
BINGO - brake light fuse. i'd love to know why it went... but anyway. theres not a fuse for the cruise in there too? i couldnt see one.
_________________ ** For Sale ** {DESCRIPTION} |
|||
| Top | |
|||
| arm79 |
|
|||
|
Read my last post again.
Let us know if the fuse blows again... It probably will. |
|||
| Top | |
|||
| fiftyone |
|
|||
|
ah, indeed you are right. took 5 mins of driving for it to activate. must be some sort of failsafe on the cruise system. very smart actually.
As it turns out, the trailer i was towing must have done it 2 months ago as thats how long i havent had cruise. scary to think its been the same with out brake lights! Thanks guys
_________________ ** For Sale ** {DESCRIPTION} |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
