|
| Adrian_86 |
|
||
|
hi guys i dont really post much as all my answers are generally found by scanning through this site but i have just converted my eb series two from auto to manual..got an ed xr6 manual computer
thought i was all sweet... cant start it nor can i find out what wiring i need to adjust to get her to start..can any one give me some advice on whats next..i have tried and tried on the net cant find anything thanks for your time |
||
| Top | |
||
| NZEA |
|
|||
|
is it turning over? Check the manual loom. 3 wires will go to your speedo sender, the other four will go to the nuetral and reverse switches.
Join them together, two at a time, until you get reverse lights(with the box in reverse and IGN on)the other two should be for the nuetral switch. Join them together and it should crank. The two wires for nuetral go on the terminals on top of the box and the two reverse wires go to the terminals on the side. Theres a tutorial you do know?
_________________ 1989 EA Falcon column shift - SOLD |
|||
| Top | |
|||
| rushed |
|
|||
|
did you follow the guide in the tech docs section, the one by "voxace" as youve probably just muddles the inhibitor switch wiring.
|
|||
| Top | |
|||
| ebtickford2 |
|
||
|
does your car have smart lock if so have you reprogramed the ecu and have you rearanged the loom pins
_________________ EBII ED Grill AU rebult motor ea t5 gli upgraded to xrghia |
||
| Top | |
||
| Adrian_86 |
|
||
|
hey guys thanks for the quick response..i have not read the tutorial..where abouts do i do so..im not sure if my ecu has smartlock...the code on the ecu is 2dad as far as i know its from an ed xr6..
|
||
| Top | |
||
| ea_falcon |
|
||
|
try using your original ecu it will still start with the auto ecu
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Adrian_86 |
|
||
|
i actually tried the auto ecu and still no spark...does everythin but start...i put the pins on the reverse and neutral...i think i have a rocky road ahead of me..
its worse cos i cant wait to see how she goes |
||
| Top | |
||
| Adrian_86 |
|
||
|
i actually tried the auto ecu and still no spark...does everythin but start...i put the pins on the reverse and neutral...i think i have a rocky road ahead of me..
its worse cos i cant wait to see how she goes |
||
| Top | |
||
| duvauchellemotors |
|
|||
|
had the same issues when i did mine
Its a matter of trying a few things and going from thier Does the car Turn over? If so you have an ignition or fuel problem chech for spark and Injector pulse. Does it prime when you turn the key? if not try these options Get The loom from the auotmatic transmission and plug it in then plug the anhibitor switch off the auto box and plug that in turn the switch so that it is in either Park or Nuetral see if it will turn over Thats what got my one going And if it wont start off the key e.g you can run a wire from the positive terminal on the battery to the positive terminal on the starter and get her to crank that way make sure you have the ignition on. THats Just my 2 sence Smart lock could be the problem What month is your EBII ? Early Model EBII didnt have smart lock. |
|||
| Top | |
|||
| nicco |
|
|||
|
i'd still be thinking its probly the neutral switch stopping it from turning over if everything else is working.
and its easy to test  i'm assuming the switch just closes the circuit when in neutral, so connect the two wires you have for it together bypassing the switch completely. if that starts it then you know the switch itself is faulty. just triple check you have the right wires for reverse lights and neutral switch, hate for it to not be starting cause you accidentally mixed two of them up. manual conversion doco can be found here: fordmods-technical-documents-diy-f38/auto-to-manual-conversion-guide-t42420.html |
|||
| Top | |
|||
| Adrian_86 |
|
||
|
thanks for all the help guys got her started...want to laugh the coil was not connected properly..re connected her and fired up..love the manual...god that auto sucks alot of power
|
||
| Top | |
||
| Froudey |
|
||
|
Adrian_86 wrote: thanks for all the help guys got her started...want to laugh the coil was not connected properly..re connected her and fired up..love the manual...god that auto sucks alot of power sounds like exactly what i did. i converted my EB and no start i was p****d posted so many idiot topics about it and lol it was just a loom located near the starter that went to the coil and alike
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| nicco |
|
|||
|
good work matey. glad to hear its sorted now. its awesome with the manual compared to the auto isnt it!
|
|||
| Top | |
|||
| NZEA |
|
|||
|
 Good s**t. We should make a list of things to check. Like does it have a starter motor?
_________________ 1989 EA Falcon column shift - SOLD |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 127 guests |
