|
| misk_one |
|
|||
|
thought id start my own thread rather than keep hijacking lol
so i put everything back together and thought everything would be sweet! tried to start the car and it would turn over and try to start but no good, so i adjusted the timing a bit and eventually got it running, but its very rough and there is a miss or 2 ive checked fuel and checked spark both seem to be doing what they are supposed to a mate has suggested possibly cam timing is out? but i didnt rotate the engine or move the cam gear and lined it up correctly when putting the gear on the cam i thought i might have messed up releasing the cam tensioner so theres too much slack in the chain? heres a vid of it running sorry its a bit loud, the ehaust isnt very forgiving lol any help would be great! http://www.box.net/shared/klztldlqfs
_________________ XG Panelvan |
|||
| Top | |
|||
| phongus |
|
|||
|
timing could be out.
Have you checked your timing using a timing light thingy? you might need to re-adjust the distributor...that's if you have one. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| misk_one |
|
|||
|
yeah ive played with the timing, but changing it didnt help things too much
i just went and checked over everything and i cant find a TPS on the t/b lol i dont remember taking it off, but i guess its missing... would a missing TPS cause it to run so choppy?
_________________ XG Panelvan |
|||
| Top | |
|||
| phongus |
|
|||
|
not too sure, only one way to find out...might idle like a b**ch.
One less sensor will confuse the computer and cause random errors. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| misk_one |
|
|||
|
yeah i was just talking to my mate
we figured if it was plugged in but not cnnected to the t/b at least it would be sending a signal back and should idle but without the PC would have no idea ill go plug it in and see what it does lol
_________________ XG Panelvan |
|||
| Top | |
|||
| misk_one |
|
|||
|
seems it was just the TPS!
never realised a car would run so s**t without one connected lol i also snapped the outer edge off a rocker arm, but i need the car to go get another assembly from the wreckers, so i pushed the bit between the rcoker arm and valve (forgot what its called??) back under the arm straight and it was good to go haha
_________________ XG Panelvan |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 100 guests |
