Fordmods Logo

Removing leads from a cluster plug 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Removing leads from a cluster plug
Posted: Sun May 10, 2009 2:33 am 
Getting Side Ways
Offline

Posts: 2059

Joined: 3rd Apr 2008

Ride: EF Fairmont, XG Ute

I'm trying to remove some of the leads from this spare plug, I want to add one into the cluster connector to enable the driving light symbol in my EF cluster.

Tips? Do you use a pin and somehow release it from the front, or just get some pliers and reef it out? I've tried reefing it, not moving...

Image
Image
I know someone here would have done this.

Cheers.
Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Sun May 10, 2009 3:26 am 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

get a sewing machine needle or something similiar and stick it down the end opposite the wire, your looking for a little tab on the back of the metal sleeve.. push the tab in and the connector should come out fine.. done it lots of times on lots of connectors.
Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Sun May 10, 2009 9:18 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

That doesn't look like the cluster plugs I've seen, but if the above method doesn't work just break the plug up, as I couldn't get the pins out of the ef/el cluster plug to come out, don't forget to shift the locking thing they use when refitting.
Goodluck with it, always nice to have those factory finishing bits to clean it up.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Sun May 10, 2009 2:35 pm 
Getting Side Ways
Offline

Posts: 2059

Joined: 3rd Apr 2008

Ride: EF Fairmont, XG Ute

OZBMX, its probably a spare plug off an aerial or demister switch then. I can't remember, I just cut it from a wreck to get the leads. I'll smash it if I can't get them out, thanks.

Cheers Frankieh, I'll give that a go first. Looks fiddly.
Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Sun May 10, 2009 10:35 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

I might be stating the obvious - the pins from that plug you've shown won't fit the instrument cluster, way too big.
As mentioned, prise the white retainer from the back of the inst cluster plug (otherwise it'll cause you grief) and lift the plug finger retaining the pin away from the pin - this is done from the plug front.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Mon May 11, 2009 1:18 am 
Getting Side Ways
Offline

Posts: 2059

Joined: 3rd Apr 2008

Ride: EF Fairmont, XG Ute

Thats not stating the obvious at all. I hadn't noticed. I'll get a cluster plug and do it then.

Thanks alot Snap.
Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Mon May 11, 2009 1:20 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

ive got 1 here u can have when u pick up the mirror
Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Mon May 11, 2009 1:38 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

p.s. did u notice the ef ghia seat base trims i got on ebay?
Top
 Profile  
 
 
 Post subject: Re: Removing leads from a cluster plug
Posted: Mon May 11, 2009 10:47 am 
Getting Side Ways
Offline

Posts: 2059

Joined: 3rd Apr 2008

Ride: EF Fairmont, XG Ute

Plug sounds good, let me know when the mirror is ready, and how much $.

I noticed them on ebay, yes.

I'll have a go at cleaning that base today and see how it comes up.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 2:51 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names