|
| falcon1999 |
|
|||
|
What is a good brand of Oil Filter Wrench?
_________________ What do you call a Hyundai with dual exhausts? |
|||
| Top | |
|||
| Krytox |
|
|||
|
Elbow Grease.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| wild_ef |
|
|||
|
all the ones ive ever used all work exactly the same.
just get one with a good flexable handle
_________________ BA Fairmont Ghia |
|||
| Top | |
|||
| easpak91 |
|
|||
|
Bunnings Bargin Bin Screwdrivers
_________________ WHO EVER SAID "TWOS COMPANY THREES A CROWD" OBVIOUSLY NEVER HAD A THREESOME |
|||
| Top | |
|||
| rdiigen |
|
|||
|
"elbow grease" , plus sandpaper for the troublesome ones.
|
|||
| Top | |
|||
| s-tranzor |
|
|||
|
Screwdriver through the side of it. Any other way = fairy's way.
|
|||
| Top | |
|||
| cjh |
|
|||
|
I use an ABW three legged one, does all the ones I need to.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| 67RCE |
|
||
|
The best oil filter wrench i have used is my right hand, if that doesnt work, use a screw driver
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| KWIKXR |
|
|||
|
I use one of those 3 legged claw ones, dont know what brand it is, but it does the job well, all you need is a ratchet and a 3/8 drive extension to get it too reach up there to the filter then undo. Good for cars that have had the oil filters put on too bloody tight. Using your hand is by far the easiest way though, aslong as the filter isnt screwed on too tight
|
|||
| Top | |
|||
| x3ros |
|
|||
|
s-tranzor wrote: Screwdriver through the side of it. Any other way = fairy's way. +1
_________________ 2003 BA Ford Falcon XR6 | BF Typhoon Intake + K&N Filter | Lukey 2.5" catback zorst | More mods coming soon.... |
|||
| Top | |
|||
| Froudey |
|
||
|
Over the years I have used various tools from that rubber grip handle to a tool brought at supercheap that only undoes the the filter it goes on a 3/8 socket and you turn. The screwdriver is great for stubbon ones and the last filter change i did i brought a "DRIFT" filter that had a 16mm like nut weleded onto the base mate that one was easy a piss to install and removal should be just as easy
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| xr6eat 50 |
|
|||
|
Buy a filter claw, they are great never met a filter they won't remove. Or better still use K&N filters they have a nut welded to the base of them so you can just use a socket to remove them!
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 94 guests |
