|
| ford_racing_8 |
|
|||
|
I fitted an NF cluster into an EF and cant work out how to stop the doors from flashing (Open and closed) without hooking up the sensors. I tried earthing all the wires from the cluster but didnt work. Any ideas??
|
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
The sensors need to be thee, they work on resistance. Did you look at the tech doc?
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| ford_racing_8 |
|
|||
|
i didnt see it, dam i was hoping i could avoid hooking up the sensors.
|
|||
| Top | |
|||
| XPFalcon170 |
|
|||
|
talk to benj. I know he has put an nf cluster into his eb wagon. He should be able to help
_________________ 84 4runner.......needs boost |
|||
| Top | |
|||
| iron_cross_customs |
|
||
|
ford_racing_8 wrote: I fitted an NF cluster into an EF and cant work out how to stop the doors from flashing (Open and closed) without hooking up the sensors. I tried earthing all the wires from the cluster but didnt work. Any ideas?? mate try looping the wires back to each outher. |
||
| Top | |
||
| ford_racing_8 |
|
|||
|
Quote: talk to benj. I know he has put an nf cluster into his eb wagon. He should be able to help Quote: mate try looping the wires back to each outher. Cheers il try that now, if not il talk to benj |
|||
| Top | |
|||
| SLO247 |
|
||
|
You should be able to use resistors of the correct values. Try finding some manual info in a fairlane manual about testing the resistance of the door sensors for correct operation, this will tell you what they should be.
Or just get the sensors, shouldn't be too hard. |
||
| Top | |
||
| snap0964 |
|
|||
|
180ohms doors closed (each line).
Without fitting the sensors, you should've stuck with a mid series cluster, as there's really no point with a fairlane cluster unless you add all it's features.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| muncher2002 |
|
|||
|
Hey there thanks snap0964 for the ohms info will come in handy when I fit up all the features, going to get a couple of resistors and dummy something up in the mean time shut up the door alarm it is driving me crazy. I just need some time to do the doors properly, one at a time. It is not a small job, i probably would have thought twice before doing it. But on the plus side I can solder really well now lol
Having a think now humm… could you just wire up a resistor up the door switch and bypass fitting the original switches?? As they are a bastard to remove and $120 new from ford ($120 in stock 26-5-09)
_________________ need a rotisserie for a classic resto 0471525912 Tom |
|||
| Top | |
|||
| snap0964 |
|
|||
|
interior-modifications-f14/ef-auto-position-on-dash-t12277-20.html
I'd suggest add the door switches and do it properly - get them from a wreckers.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 55 guests |
