Fordmods Logo

347ci Ghia / Wolf controlled trans project - Success!!! 

 

Page 2 of 3 [ 45 posts ] Go to page Previous  1, 2, 3  Next

 
 Post subject: Re: Ghia stroker / Wolf controlled trans project
Posted: Tue Jul 06, 2010 11:10 am 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Yep, only learnt on the weekend that Wolf had sorted their v500 to return all the Ford ECU functions and features when running the v500 as stand alone and being able to adjust the transmission on the fly with the laptop is very cool.

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: Ghia stroker / Wolf controlled trans project
Posted: Fri Aug 27, 2010 7:46 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

It's been a bit slow since last month but finally the harness and wiring has begun for the installation of the Wolf as the standalone ECU and to control the transmission. I get to say bye bye to both of the Ford computers and say hello to full trans control.

Image


Image

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: Ghia stroker / Wolf controlled trans project
Posted: Fri Aug 27, 2010 7:57 pm 
Getting Side Ways
Offline

Age: 41

Posts: 3405

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

Very nice Vic.

Is that a loom adapter (at the kick panel) from Wolf or did you do that yourself?
Top
 Profile  
 
 
 Post subject: Re: Ghia stroker / Wolf controlled trans project
Posted: Fri Aug 27, 2010 8:08 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Wolf made it. My car is the guinea pig for the release and update of the v500's full Ford V8 emulation ability. I'm itching for the day my car hits the dyno and is released back to me.

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: Ghia 347ci / Wolf controlled trans project
Posted: Wed Sep 08, 2010 9:29 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Stuffed S1 solenoid removed and replaced.
I now have 4 gears again. :P

Image

Next: some dyno tuning of the BTR..

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Wed Sep 08, 2010 9:41 pm 
Getting Side Ways
Offline

Posts: 2410

Joined: 4th Sep 2006

Location: Sydney
NSW, Australia

How much did it cost u to balance the rotating assembly and how much extra mallory was used???

Any reason why u went with scat over eagle???

 

_________________

Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color]

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Wed Sep 08, 2010 9:57 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

I'm really good at filing receipts.. so good that I can't find them.
But going on memory the stroker kit was about $2,500 and the block work was maybe $2,000 or so.
I have a higher opinion of Scat than I do of Eagle but that's a purely personal belief after some research as well as some testimonials from other performance engine builders' that I respect. Besides the price wasn't too bad at the time.

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Wed Sep 08, 2010 10:55 pm 
Getting Side Ways
Offline

Posts: 2410

Joined: 4th Sep 2006

Location: Sydney
NSW, Australia

I found that scat have better quality finish than eagle and apparently tollarence is better with scat gear.

 

_________________

Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color]

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Thu Sep 16, 2010 9:53 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

A quick update; I stopped by the workshop today and found the car has been and remains on the dyno while the transmission gets programmed. I watched the tuner work on the laptop for a little while and bugger me there's a lot to do when the data has to be created from scratch. Glad I'm not the one stuck with the job of programming 7 solenoids and all the fiddly s**t required for the transmission to work properly.
However I did enjoy hearing the engine growl through the gears on the dyno. I miss my car. :(

Image

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Thu Sep 16, 2010 10:32 pm 
Fordmods Newbie
Offline
User avatar

Age: 34

Posts: 12

Joined: 16th Feb 2010

Ride: 2002 au fairmont

Location: laurieton
NSW, Australia

this is such a nice car , makes me miss my el lol
Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Thu Sep 16, 2010 10:49 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Thanks mate. Image

The last time I spoke with the Wolf engineer about how I wanted the gears to shift for different occasions, he said he'd just program the trans to shift hard and fast when it detects WOT or if the throttle position is set to a certain percentage, i.e: 80%.

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Thu Sep 16, 2010 11:20 pm 
Getting Side Ways
Offline

Posts: 2410

Joined: 4th Sep 2006

Location: Sydney
NSW, Australia

It's a massive job to program the trans and once its fully tuned u will be back for more find tuning but its good that the eu can detect it WOT to shift harder.

All we need is some high quality video's :D

 

_________________

Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color]

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Thu Sep 23, 2010 2:00 pm 
Tyre Shredder
Offline

Age: 44

Posts: 311

Joined: 10th May 2005

Ride: ebxr8

Location: melbourne
VIC, Australia

any updates??

 

_________________

347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Thu Sep 23, 2010 2:56 pm 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Dropped by the workshop yesterday and was told that most of the transmission tuning has been completed and was very successful. Apparently the transmission is doing very well on the road, even chirps on the dyno - they leave the soft shifting tuning for last. As of last night, the car was moved back to Wolf HQ for some further tweaking of the software as well as having the missing Ford features reactivated; trip computer etc etc..
I guess with my car being the prototype for the transmission tuning for e-series, they are being quite thorough.
Tell you what, my bike gets garaged as soon as I get my car back... can't wait to hit the road with it.

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
 
 Post subject: Re: 347ci Ghia / Wolf controlled trans project
Posted: Thu Sep 23, 2010 3:04 pm 
Tyre Shredder
Offline

Age: 44

Posts: 311

Joined: 10th May 2005

Ride: ebxr8

Location: melbourne
VIC, Australia

{USERNAME} wrote:
Dropped by the workshop yesterday and was told that most of the transmission tuning has been completed and was very successful. Apparently the transmission is doing very well on the road, even chirps on the dyno - they leave the soft shifting tuning for last. As of last night, the car was moved back to Wolf HQ for some further tweaking of the software as well as having the missing Ford features reactivated; trip computer etc etc..
I guess with my car being the prototype for the transmission tuning for e-series, they are being quite thorough.
Tell you what, my bike gets garaged as soon as I get my car back... can't wait to hit the road with it.



sounds good mate keep us up dated

 

_________________

347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 3  [ 45 posts ]  Go to page Previous  1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 69 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 1:02 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names