|
| Mad2 |
|
|||
|
Mad2 wrote: have been working [sorta] on the BF/EB. BF has had all seats removed as well as door trims, carpet & parts of the dash. will be using the BA door trims etc from the BA parts car. EB has had same done, and will be using EF/NF door trims & seats with EL rear cargo are items. TROY. wrote: i just conected the power window wires up to the el switch.. if anyone is interested in how the wires are conected..(for those who are considering doing this mod)i took some pics..  i was thinkin i would have to do this mod . . . . then i was looking for some items .... then found this!    have removed tape wrapped around it & will heat shrink joins etc properly. Cheers and redone. there was a cupla heatshrinks on it, but the rest were just taped up. just need to grab some non-adhesive pvc tape & re-bandage it.  depending on how well the connects up & sits with the door trim back on, i may or may not redo wiring length. seems ok without trim there |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Tapped & fitted- currently without trims fitted
  look i will be going for   NF seats & door trims to be fitted from donor with doors modified for armrest mounts screws using Snap's suggestion. will be modifying front floor for the one mounting spot & modifying rear of seat rail & fitting a EA/ED mount.  most of it sitting in the back  NF parts car.  and in case your wondering .... yes i would love to fit the EL handbrake.... but i don't want the EL console! ......... not yet any way lol have the NF interior light & loom. loom is yet to be modified with sections from [i think?] an AU1 Fairmont. pics another time. how hard is it to change the engines front crank seal? |
|||
| Top | |
|||
| Mad2 |
|
|||
|
anyone able to tell what differances there are between the EB2 'S' & EB2 Fairmont dash looms are
 as i'm currently leaning towards changing dashes due to marks on the Fairmont unit. they both have the dash tweeters & same cluster. the only differances i've noticed are the heater/aircon controls & the 'S' has a relay roughly where the handbrake is.Thanks
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
Hi all.
can anyone tell me what temp sender i should be using to control thermo fans? ... currently thinking of 95C on & 90c off temp sender. thanks |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Mad2 wrote: Hi all. can anyone tell me what temp sender i should be using to control thermo fans? ... currently thinking of 95C on & 90c off temp sender. thanks anyone give me an idea of what pulling a parts car apart and found this. drivers side  passenger side is not quite as bad ... but! it does have the same/similar foam that was used to "stick" driver's rear window in place  and does move up top, but not as much  explains ALL the water that was coming in  saw next.............. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
EL sender? 6810428 Genuine number but I am sure you can find a used or replacement?
|
||
| Top | |
||
| Mad2 |
|
|||
|
Papa Smurf wrote: EL sender? 6810428 Genuine number but I am sure you can find a used or replacement? as in what temperature range do i need/want for the operation of the fans
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
That one is the factory EL/AU one for the thermo fans and for many other Fords. I believe it is 95c?
|
||
| Top | |
||
| Mad2 |
|
|||
|
Papa Smurf wrote: That one is the factory EL/AU one for the thermo fans and for many other Fords. I believe it is 95c? ahhh gotcha Papa. 
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
Good morning all .. Happy New Year and all
just a quicky.... is the item in the pics an original part from a EA?. think the doors came from a '89 Fairmont Ghia 3sp    Cheers |
|||
| Top | |
|||
| Mad2 |
|
|||
|
wellll been a 'while'..........
EB Fairmont will be put up for sale ........  all parts fitted from EL/NF/NL etc will be removed & fitted to the base model EB i will be keeping. i want to combine this  with this.....  ............ both cars were duel fuel |
|||
| Top | |
|||
| Mad2 |
|
|||
|
and in case ya wonderin why
i blame TimmyA http://www.fordmods.com/the-garage-f53/timmya-s-93-ed-falcon-t79040.html just not sure on cluster..........
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
Mad2 wrote: wellll been a 'while'.......... EB Fairmont will be put up for sale ........ all parts fitted from EL/NF/NL etc will be removed & fitted to the base model EB i will be keeping. i want to combine this with this..... ............ both cars were duel fuel changed mind again....... keeping the Fairmont.
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
still got the Fairymont.................
not much happening with the Fairymont....... how ever some time next week [or weekend?] picking up some DA front seat bases & console for the EB Fairymont   both seats are electric & will also be getting the looms [just no uppers]. biggest bonus is the console from same LTD  again all looms [hopefully] coming with it & hopefully i can workout how to wire into the main unit  matching ph...................... and in 'case' your wondering .... the bases will be fitted to NF Fairymont seats which i already have also have the matching XR bonnet protector
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
ok. picked up the seat bases .... with the seat uppers still attached............
seat bases....... with a lot of foam in the base for ya butt!.   removed from seats - seat brackets 'may' needed to be remade/modified to suit the NF seats. will check when able to.  seat side panels  switches  seat switches & motors all work & appear to work well. power cable between the two seats had been cut so it was rejoined & heat shrink fitted. also picked up the console...    which now means i will need to find the 'main' stereo section so i can have the rear working as what i have is not suitable 
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
