nothing much happening.......


right rear loom to mod/fit for the BAFLR6




that's not including the tailgate section of the loom.

so ....... the BA is currently on hold due to killing off another gearbox with a BF M7 currently being worked on .. it's a LPG only car.

the BF currently has had the front seats changed to Fairymont Ghia style seats, but with out the 6way/8way memory bases [later stage] as the base 6way seat bases have been fitted [from the BA].






as per the BA it has the FG steering wheel/clockspring & SZ combination switches. majority of the car interior has been changed from brown .. to black. none of the wiring has currently been changed as that will be a 'later' job [after i find a BF Fairymont LPG PCM & matching ABS plus rear brake lines!] as the BA is currently not on the road

just picked up a surprisingly very good condition cornering light set [with base], Fairylane grille and memory mirrors plus vents.

the BF now has the BA ICC & a BF XR cluster fitted & working, the cluster needs to go to http://clustermods.joomla.com/index.php to have the fuel gauge altered to suit the wagooon. as per the BA i have 8way seat frames waiting to be covered/fitted to both cars - that's both front seats. for the rear seats i'm 'making do' with some NU Fairylane seats ..... when the correct rear seats from a Fairymont pop up i'll be grabbing em.

the BF has had the rear wiring loom for electric windows fitted ...... just need to finish it off by fitting the correct regs, which i have. and both M7's have all the wiring looms needed to suit [mix of SX/BA/BF/SY] plus all the required parts to turn the wagooons into 'Fairymont Ghia' clones. hopefully all done sooner ..... than later


cheers

well .....









anyone gotz any advice??.


Thanks

Do you know anyone with a 3D printer that can mock it up for you?

nah i don't. however i do have a sheet of ally to help me out with that issue. current issue is getting motivated and seeing where i went wrong with my rewiring issue/trial

Sounds like me finding the motivation to try to find my boost leak and replacement oil feed line for the turbo.

Keen to see how you progress though.

so do i!

at the momento it's a case of where do i go/start....... the one person i know that could answer all my questions & help point me in the right direction .. passed away a coupla years back

i seem to have NO communication between the cluster, ICC, HIM & PCM, but they show up with no DTC's shown [well except for the PCM which comes up with faults due to missing parts from engine & dead gearbox - coolant thru box & no pan]. doesn't seem to be any issue with the BEM as i changed the column & programmed in new keys for it!. and except for the 4 items mentioned ...... everything else seems to work?.

half tempted to find another BA Fairylane dash loom & retry with that..


i gotz this far and then . . . . ... .



all airbags are fitted even tho steering wheel bag isn't shown in pic, plus cluster is also fitted. and no fuses seem to have blown?.

Sorry to hear about your mate.

You've sure got a project on your hands there.

Definitely sounds like it would be worthwhile picking up another dash loom and go with that.

your going well with your new turbo project yourself. i recognize the pic.

yeah the mate was someone that everybody got along with and his name is Gothefalcon [RIP] an awesome bloke.

my problem is understanding how to mate up the Fairylane/Futura [wagooon]/territory wiring looms without hiccups...... i have previously fitted Gothefalcon's [RIP] FG steering wheel mod [with SZ combo switch] with the steering column that he mentioned still to be fitted after all the wiring is done.

Hey, thanks mate! And yeah, cheers, it’s been a fun (and sometimes challenging) turbo journey. Really appreciate the recognition. paint tech hamilton

Sad to hear about Gothefalcon—sounds like he was a true legend in the community. His mods and advice helped so many of us, and it’s good to see his influence still rolling on through builds like yours. [RIP Gothefalcon].