|
| Bomber |
|
|||
|
Well Fitted the bushes and control arms today all went nice and smooth no issues. Handeling wise i have changed the rebound of the shocks a little to make them a tad softer now with all the nolathane in the back end. It feels much the same as before not harsh but the diff now doesnt move around or axle tramp and it like sliding sideways
 Watts Link  Upper trailing arms  Lower trailing arms  
|
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Are those upper and lower control arms shorter than stock. They seem to be in the pics, but about 10mm on the upper and 15-20mm on the lower
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Bomber |
|
|||
|
Nah Brett its just the way they appear in the pics mate
|
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
greatlooking tastefullymodded au.. one of the best example's..
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
Any more info and pictures re the fitting of the T56? How'd the clutch pedal go - being an AU was it fairly straight forward due to the similarities with the B-series? How'd you go with the rear bracket for the T56? Is it just a standard BA 6 cylinder clutch kit and flywheel required to bolt to the AU motor or was there some mixing and matching with AU and B-series parts? Does the T56 6 cylinder bellhousing bolt pattern match that of the back of the AU motor? AU starter motor?
A lot of questions there I know, but I'm looking to convert my EF which is running an AU motor as my next project... |
|||
| Top | |
|||
| Bomber |
|
|||
|
{USERNAME} wrote: Any more info and pictures re the fitting of the T56? How'd the clutch pedal go - being an AU was it fairly straight forward due to the similarities with the B-series? How'd you go with the rear bracket for the T56? Is it just a standard BA 6 cylinder clutch kit and flywheel required to bolt to the AU motor or was there some mixing and matching with AU and B-series parts? Does the T56 6 cylinder bellhousing bolt pattern match that of the back of the AU motor? AU starter motor? A lot of questions there I know, but I'm looking to convert my EF which is running an AU motor as my next project... Clutch pedal is cut and weld BA pedal onto AU pedal box. Trans mount is standard AU holes have been drilled further back. Flywheel is a 10.5" AU windsor. Clutch is XR6T 6 speed T56 bolt pattern for 6 cylinder is same AU and BA/BF AU starter motor bolts straight up |
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: Flywheel is a 10.5" AU windsor. And that bolts up to the AU 6cylinder no dramas? Cheers for the info! |
|||
| Top | |
|||
| Bomber |
|
|||
|
couple of pics new pics
   
|
|||
| Top | |
|||
| mitchell g |
|
||
|
lookin nice bomber
|
||
| Top | |
||
| XH XR6 |
|
||
|
Awesome you can see my ute in your second last pic
 Great car mate, really nicely done. Ben |
||
| Top | |
||
| britishracinggreen |
|
||
|
i have a t56 here, for my au it's an auto though
you've given my a bit of encorougement now i'll have to have a go one thing but, where did you get all your parts from? |
||
| Top | |
||
| Bomber |
|
|||
|
few new pics from a photo shoot on friday night
     
|
|||
| Top | |
|||
| cheersdude |
|
|||
|
Clarance has done a top job on your photo's, I'm really keen to get some of mine done against a graffiti wall, I got some done by him in a car park back in Feb, can you PM me the location?
_________________
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Bomber, while I appreciate what you have done with your Car I don't go much on the scoops but, that's a personal choice.
 What i would like to know is where you got the Upper and Lower rear control arms?The lower ones especially look much cleaner and nicer than the Originals. |
||
| Top | |
||
| Vic |
|
|||
|
Look good against that backdrop Mark. Nice!
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 57 guests |
