Fordmods Logo

Building a NL Fairlane A drag car 

 

Page 10 of 13 [ 189 posts ] Go to page Previous  1 ... 7, 8, 9, 10, 11, 12, 13  Next

 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 8:43 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Yep got them boot is enclosed and all the holes on top. Line locker is installed and pulled the abs out and re done the lines so dont have to worry about that bull s**t.
couple of holes to patch up in the fire wall from where the aircon was and some in the floor pan. other than that i dont see why i wont be out at the track friday night.
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 9:35 pm 
Stock as a Rock
Offline

Age: 48

Posts: 114

Joined: 29th Jan 2011

Ride: NL Fairlane. 5 liters of Fun!

Location: Bathurst/Orange
NSW, Australia

ooking forward to seeing those timeslips!
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 9:39 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Me too first time racing, i'm expecting something like a mid to late 15s at like 80/90mph
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 9:59 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 416

Joined: 19th Dec 2008

Gallery: 4 images

Ride: AUII XR8 ute

Location: Ballarat
VIC, Australia

{USERNAME} wrote:
Me too first time racing, i'm expecting something like a mid to late 15s at like 80/90mph

That sounds about right. I ran a stock standard auto AU XR6 a few times, a few years ago and it ran low 15. If I was you I'd stall it up as far as it will go without spinning the wheels, then dump it and let the auto do the shifting. Old btr's dont shift when you tell them to anyway. You end up over 5000 with it doing nothing.

 

_________________

How many bears could Bear Grylls grill if Bear Grylls could grill bears?

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:03 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Like out it in drive or go 1.....2.....3....finish line
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:07 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 416

Joined: 19th Dec 2008

Gallery: 4 images

Ride: AUII XR8 ute

Location: Ballarat
VIC, Australia

{USERNAME} wrote:
Like out it in drive or go 1.....2.....3....finish line

If you go 1 2 3 by the time the revs get high and you want to shift, and you push the lever, by the time you get the car back on the trailer, and you're back at home, asleep, in your bed, is when the gearbox will actually shift up. Id leave it in D, but thats my experience, you'll be doing a few runs I reckon anyway so just try it both ways.

 

_________________

How many bears could Bear Grylls grill if Bear Grylls could grill bears?

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:12 pm 
Getting Side Ways
Offline

Age: 29

Posts: 3344

Joined: 19th Dec 2008

Gallery: 1 images

Ride: el fairmont ghia

Location: Farleigh
QLD, Australia

{USERNAME} wrote:
Like out it in drive or go 1.....2.....3....finish line


burnout, 1st 2nd if you want, i just leave auto's in drive, then then don't bother trying to stall it in my oppion, just drop your brake, on the last orange, either hand brake it or left foot on the pedal, mine was a manual so i could just sit with my revs up and pop the clutch, the car wouldn't roll but auto will want to roll still

 

_________________

{DESCRIPTION}
Image
did someone call 9 1 HOLY s**t?

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:35 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Ok thanks for the advice, I don't think ill stall it as the I'm not running slicks and if I leave to hard it'll just spin the tyres. Correct?
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:43 pm 
Getting Side Ways
Offline

Age: 29

Posts: 3344

Joined: 19th Dec 2008

Gallery: 1 images

Ride: el fairmont ghia

Location: Farleigh
QLD, Australia

unlikely to spin, my el ghia is a manual with a DOHC and i run a semi slick tyre 24/7 and i was popping the clutch at 4500 and getting a slight chirp off the line, which is good, but and auto is more likely to bog as soon as the break is released

 

_________________

{DESCRIPTION}
Image
did someone call 9 1 HOLY s**t?

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:44 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

I'll try both way i guess only way to learn
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:44 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 416

Joined: 19th Dec 2008

Gallery: 4 images

Ride: AUII XR8 ute

Location: Ballarat
VIC, Australia

Id be surprised if you got much more than some chirping.

 

_________________

How many bears could Bear Grylls grill if Bear Grylls could grill bears?

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Mon Apr 28, 2014 10:45 pm 
Getting Side Ways
Offline

Age: 29

Posts: 3344

Joined: 19th Dec 2008

Gallery: 1 images

Ride: el fairmont ghia

Location: Farleigh
QLD, Australia

{USERNAME} wrote:
Id be surprised if you got much more than some chirping.

i've raced on the track he'll be using so yeah very lucky, and it's a proper meet this saturday so the track will be preped up really well

 

_________________

{DESCRIPTION}
Image
did someone call 9 1 HOLY s**t?

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Tue Apr 29, 2014 12:21 am 
Getting Side Ways
Offline

Age: 39

Posts: 1040

Joined: 4th Aug 2010

Ride: NA Fairlane, DC LTD

Location: Alice Springs
NT, Australia

{USERNAME} wrote:
{USERNAME} wrote:
Like out it in drive or go 1.....2.....3....finish line

If you go 1 2 3 by the time the revs get high and you want to shift, and you push the lever, by the time you get the car back on the trailer, and you're back at home, asleep, in your bed, is when the gearbox will actually shift up. Id leave it in D, but thats my experience, you'll be doing a few runs I reckon anyway so just try it both ways.


BaHAHAHAHAHA!!!!! Rofl!!!!!!

That's so true though, under full throttle your best to use the power button and leave I in D..

Try your first run just flooring it and try a few stalling it up a little, nothing hard just a little for a bit more go off the line, practice makes perfect or if it just bogs then leave it.

Did you do the auto shift kit mod yet? Not 100% as I haven't done it myself but AFAIK it tightens the shifts up a bit (input anyone?)

 

_________________

[color=#004080]Cheers, Jacob.

NA Fairlane Build thread:
the-garage-f53/my-fairlane-build-lowlane-t94891.html.
Also in the garage....
AU LTD, DC LTD, and Lowlane.

Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Tue Apr 29, 2014 9:00 am 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

yeah put a shift kit in her
Top
 Profile  
 
 
 Post subject: Re: Building a NL Fairlane A drag car
Posted: Tue Apr 29, 2014 7:06 pm 
Parts Gopher
Offline

Age: 34

Posts: 76

Joined: 24th Feb 2014

Ride: 98 NL Fairlane

Location: Mackay
QLD, Australia

Doors are done, boot done, breaks/linelock done. Looking good for friday.
Photo of the door.
https://www.flickr.com/photos/122310286 ... 061360004/
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 10 of 13  [ 189 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11, 12, 13  Next

Who is online

Users browsing this forum: Facebook [Bot], Majestic-12 [Bot] and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 22, 2024 9:00 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names