|
SWC |
|
||
|
{USERNAME} wrote: It vents to atmosphere . You will need to plumb it in before you do engineering. |
||
Top | |
ef_falcon_95 |
|
|||
|
Haven't gone yet going at 630
_________________ El XR6 Turbo |
|||
Top | |
ef_falcon_95 |
|
|||
|
Tunes getting there slowly , run into a issue with the leads , there not silicon surpressed and are interfering with the haltech .
Also if I have a 12 psi spring can I run a lower boost such as 10 psi or 8 ?
_________________ El XR6 Turbo |
|||
Top | |
TROYMAN |
|
||
|
to run lower boost you need a softer spring in the wastegate.
|
||
Top | |
ef_falcon_95 |
|
|||
|
Would I alreast get 10psi from a 12 psi spring
_________________ El XR6 Turbo |
|||
Top | |
TROYMAN |
|
||
|
depending on the wastegate size and quality or age of the spring, a 12 psi spring should give you pretty much spot on 12psi + or - 1 psi..
|
||
Top | |
ef_falcon_95 |
|
|||
|
I'd better find a 6psi spring then .
_________________ El XR6 Turbo |
|||
Top | |
ef_falcon_95 |
|
|||
|
some good news .
worked out i only have a 4.3 psi (0.3bar) spring. went on the tial website and found the spring colours. getting tomorrow some top gun pro racing leads which wont interfere with the haltech. then hopefully tune will be done
_________________ El XR6 Turbo |
|||
Top | |
bry40l |
|
|||
|
{USERNAME} wrote: some good news . worked out i only have a 4.3 psi (0.3bar) spring. went on the tial website and found the spring colours. getting tomorrow some top gun pro racing leads which wont interfere with the haltech. then hopefully tune will be done I take it your still running a t5 and stock clutch? 6 psi would probably be ok for a while lol,
_________________ BF XR6 |
|||
Top | |
ef_falcon_95 |
|
|||
|
Yup still stock clutch , I might drop it down to 6 psi . Clutch slippage is the last thing I want .
_________________ El XR6 Turbo |
|||
Top | |
bry40l |
|
|||
|
Yeah I replaced my clutch the other day and icant believe how good it is now lol, a worn or slipping clutch is so annoying
_________________ BF XR6 |
|||
Top | |
ef_falcon_95 |
|
|||
|
A new clutch feels heaps good . My pedal feel was s**t , now it's great .
No auto shops had top gun pro racing leads but auto barn have top gun max 300 which is RFI protected . Tuner is going to Sydney today if he's back not too late we'll put the leads on and give it a run under load . Also have to check timing is being pulled out as boost comes on because it pinged .
_________________ El XR6 Turbo |
|||
Top | |
B Bear |
|
|||
|
I cannot wait to see this tuned mate !
|
|||
Top | |
ef_falcon_95 |
|
|||
|
Me either , should be done tonight if all goes well
_________________ El XR6 Turbo |
|||
Top | |
TURBO_GHIA |
|
|||
|
so how did it go ?
_________________ HMMMM BOOST !!!
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 10 guests |