Fordmods Logo

Daniels EL XR6 build 

 

Page 2 of 40 [ 588 posts ] Go to page Previous  1, 2, 3, 4, 5 ... 40  Next

 
 Post subject: Re: Daniels EL XR6 build
Posted: Mon Jul 11, 2011 2:44 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

havnt updated my build in a while due to not being able to upload photos for some reason :S well since i posted the pictures ive installed:
a set of high tech extractors. which i sanded back and fitted my self.
a ba air box with a pod filter in side.
a set of 18inch dark agent rims
a wade 1673 cam
alpine 6inch speakers in the front, kenwood 3 way 6x9's in the back, kicker amp with a kicker 12inch sub.
and after these mods ended up screwing the motor and having to go off and but another motor, which i bought an au XR6 motor paid $550 for it and is at the workshop getting the original motor pulled out as im typing this.
will post pics soon.

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 2:38 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

well got the au motor in to my el xr6 afew weeks ago and noticed yesterday that the water was abit low.topped her back up.had a look again to day about 3 liters was gone again.checked the exhuast abit of water coming out.cant be condensation drove it into the city and back.could i have another fkd head gasket?the prime reason i p****d off the old motor was because of the head gasket and put this one in now because apparantly the head gaskets are stronger and it looks like i might be in the same spot.any one no much about this problem?

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 2:50 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

Could be a blown head. Check your dip stick for water in the oil. And check the side of the block to see if there's coolant running down it

If not then check for coolant leaks .
If it's leaking that much it should be on the ground . Unless it's the head and is leaking into the motor .which it most likely is.

My head is leaking .luckily on the outside.I'm changing the head gasket next week .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 2:54 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

well my heater smells like f*cking s**t so maybe its going into the heater (i know it wont be that) im just f*cking spewing if it is the head or head gasket bcos i changed my motor from that and now running into the same s**t problem :x

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 2:59 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

well i just checked the dip stick and the oil cap and oil looks perfect.which it should considering i put it in 2 weeks ago.and side of the block looks ok.i dont know what it could be. :?

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:00 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

Could be a leaking heater core.
Check under the dash for water leaking onto the carpet.

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:05 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

hahahaha i think it is that because my girlfriend left he 100 dollar wallet on my carpet on the passenger side and now it looks kinda fked,looks like some one sat it in dirty water. .ill go check that now.so i should look on the passanger side?

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:10 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

Did you check both sides of the block ??

If you did and u didn't see any signs of coolant leaking . And you said the oil isn't milky .
It must be the cooling system. Heater hoses, heater core, radiator etc

You said it was leaking 3L a day ? Thats a lot of coolant has to be going some where .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:14 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

yeah i know man i just checked the carpet on the passanger side and its wet but not 2-3 liters wet and its not dropping on the ground when its started.but i did notice that wneh the heaters on on the window on the front it get very moist.

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:21 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

U have a leaking heater core . Or could be blocked .
Does your heater work ??
If not it's blocked .
If it's blocked take the heater hoses off. They are in the engine bay under the bbm on the firewall.
A C*** to take off.
Once their off stick a garden hose in there, flush it out good.

If it's not blocked and just leaking you have the fun job of removing the dash and heater box. While your at it add climate control.

I've been their done that . So Can help you out .
I'd say the heater core has rusted a hole.

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:28 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

It shoudnt leak as long as the Heater is off. Cos the heater tap will be closed stopping the flow of water

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:32 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

hahaha alright sweet well ill try that for now see how it goes tomorrow.
cheers for that.you already go on your holiday?

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:33 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

Just read the previous post u said it's moist when the heater is on. It's definatly the heater core leaking . As I said before . Don't use the heater and it won't leak .

U will need to rip out the dash and possibly the heater box .
No to bad of a job just awkward getting the dash in and out .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Aug 03, 2011 3:36 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

I'm on holidays now .
Hot up here in QLD . Should of brought my xr6 up as there was a ford cruise from Mackay lol
They were from ford club of Mackay had the sticker on their window . One had a nice ef xr6 turbo .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Thu Aug 04, 2011 2:11 pm 
Getting Side Ways
Offline

Age: 32

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

hahaha sounds like i should get out of this sh*t melbourne weather.well i drove the car last night with heater off and the carpet was drenched.lol.doing my head in this car.fix one problem a million others pop up :x

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 40  [ 588 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 40  Next

Who is online

Users browsing this forum: No registered users and 57 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 3:50 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names