|
| DormanAU |
|
||
|
hey guys just a tad bored so thought might do a build thread.
We got the AU in 2003 when my older brother was learning to drive, wanting a manual mum brought this AU, factory 5sp. my other brother also learnt to drive in it and me being the last i got it. was stock then other then a set of 17in AMG wheels...oh how things change. 1st mod was the exhaust as the old one broke off when we were attempted to cut out the ressy and weld a pipe in there, got a red back 2.5 cat back 1 muffler and hotdog ressy, at the same time put some lukey extractors...people say there rubbish, but they sounded mean also had a ba xr6t snorkle Attachment: 19012009(003).jpg Attachment: 19012009(001).jpg got dyno'd at 117rwkw at this point with needing a service...prob silly idea to get it when i did  stayed like this for a while and then saw a set of 20" wheels on ebay cheap as so i got them and put them on and looked like this Attachment: 4wd.jpg any after to many safari snorkle jokes i lowered it with supers in the rear and ultras up front but still sits a tad lower in the bum  how it looks there.Attachment: lowered.jpg i had heaps of trouble with the bush falling out from the selector cup in the shifter so it gave me the excuse to purchase a monza billit short shift....there great!!!! next was the addition of the extractors shown in show us your pipes for those who havent seem them Attachment: extractors.jpg now sitting on the 17s again waiting for me to get off my bum and paint them with DNA paints. i have a vct head that im going to get ported and polished with a stage 3 cms cam stuck between the rockers. any coments welcome or ideas. You do not have the required permissions to view the files attached to this post.
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks Last edited by DormanAU on Sun Apr 03, 2011 9:05 pm, edited 18 times in total. |
||
| Top | |
||
| DormanAU |
|
||
|
here is the short shifter
Attachment: shifter.jpg heres just a little something i have been piecing together Attachment: 22122009.jpg and also the rocker cover if painted up for the VCT head Attachment: vct rocker 1.jpg
You do not have the required permissions to view the files attached to this post.
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| DormanAU |
|
||
|
have been installing 2 aftermarket gauges infront the shifter, the oil pressure and oil temp.
being a right royal pain, the pressure gauge drops to 0 with the lights on and the temp doesnt work when the car is started but turn it right off and turn it back on acc it works, sits on about 55deg. these days the car is running roof racks as i love kayaking but they dont fit in the boot will be romoved in the winter as the water is way to cold which sucks. comments welcome. also gippy members should start a regular cruise
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| Dansedgli |
|
||
|
Try earthing the gauges on the motor near the sensors.
|
||
| Top | |
||
| DormanAU |
|
||
|
earth the gauge units near the sensors? would that make much difference? at the moment its earthed off the dash brace
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| DormanAU |
|
||
|
in response for ram air thead....the semicircle cut was where i used a bit of poly pipe like in an autospeed article, then made this one
Attachment: 22032009(001).jpg bugs are also and issue You do not have the required permissions to view the files attached to this post.
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| ED_XR6_5 SPEED |
|
|||
|
{USERNAME} wrote: also gippy members should start a regular cruise also agree to this^^^, we do need more cruizes down this way, would give me more insentive to stop drinkin so much alcohol haha.
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
new rims great.. dumpage now 1 billion percent better!
|
|||
| Top | |
|||
| DormanAU |
|
||
|
yeah had to dump it, people at tradeschool picked on me...said i should get a snorkle and take it bush
installed my gauges today and the temp gauge plays up. works on acc but when i turn the car on it goes spastic and doesnt work. so i put it on a switch and still doesnt work any ideas
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| DormanAU |
|
||
|
heres the gauges, still trying to get them working, going to my local autobarn where i got the gauges from and get there opinion.
You do not have the required permissions to view the files attached to this post.
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| ED_XR6_5 SPEED |
|
|||
|
is it the oil presure gauge?, a mate had the same problem with the ones we put in his vl, had to get a new gauge, if not just double check your wiring, always helps.
cheers, Tomo
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| Matt_jew |
|
||
|
You havnt hooked the ignition feed to your guages up to a data line by accident have you?
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| DormanAU |
|
||
|
the power runs off the the ciggy lighter and i can get both gauges to work, oil pressure with car on and no lights on, oil temp with car turned right off then onto acc and it works.
whats got me stumped is they work sometimes and not others
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| DormanAU |
|
||
|
ed xr6 speed i went to school with you...hung out with dinga all the time?
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| ED_XR6_5 SPEED |
|
|||
|
that i did, well for the whole year i was at tht school lol, wats ur first name? im havin a hard time workin out who it is
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
