|
ToranaGuy |
|
|||
|
Fair enough man, know what you mean about the Xr.
If the sports exhaust for the Xf won't cost you too much more than std, and you need to replace it anyway, do it, it should give you a bit more fuel economy at the end of the day. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
Top | |
rustyeb1991 |
|
||
|
do you have a stock ed exhaust if so use the mid pipe and cat if xf has cat then just a 2+1/4" tail pipe and front pipe as 2+1/4" goes perfectly on crossflows we did it to our efi xf2 with good results and cheap too as the pipes off the ea were free to us the other option is just to slot file the mid to front flange and bolt it up as it was our mufflers and tail pipe that were u/s
|
||
Top | |
XD VAN 82 |
|
|||
|
ToranaGuy wrote: Fair enough man, know what you mean about the Xr. If the sports exhaust for the Xf won't cost you too much more than std, and you need to replace it anyway, do it, it should give you a bit more fuel economy at the end of the day. Cheers ToranaGuy well it only has half an exhaust since a friends driveway tore it off when it was low it sounds like a truck sports exhaust shouldnt be to much more then standard atleast then it will sound nice
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
XD VAN 82 |
|
|||
|
rustyeb1991 wrote: do you have a stock ed exhaust if so use the mid pipe and cat if xf has cat then just a 2+1/4" tail pipe and front pipe as 2+1/4" goes perfectly on crossflows we did it to our efi xf2 with good results and cheap too as the pipes off the ea were free to us the other option is just to slot file the mid to front flange and bolt it up as it was our mufflers and tail pipe that were u/s xf has no cat and the only ed exhaust i have is on the ed it needs the exhaust replaced all the way to the manifold where it bends from the engine bay to underneath the car someone welded a thick piece of still onto the exhaust looks like theres a few holes around it to.
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
rustyeb1991 |
|
||
|
XD VAN 82 wrote: rustyeb1991 wrote: do you have a stock ed exhaust if so use the mid pipe and cat if xf has cat then just a 2+1/4" tail pipe and front pipe as 2+1/4" goes perfectly on crossflows we did it to our efi xf2 with good results and cheap too as the pipes off the ea were free to us the other option is just to slot file the mid to front flange and bolt it up as it was our mufflers and tail pipe that were u/s xf has no cat and the only ed exhaust i have is on the ed it needs the exhaust replaced all the way to the manifold where it bends from the engine bay to underneath the car someone welded a thick piece of still onto the exhaust looks like theres a few holes around it to. you're right i just looked back and realised ours was xf2 which was eecIV with cat but you could still use a mid pipe someone on here must have one in their shed just waiting for an xf |
||
Top | |
XD VAN 82 |
|
|||
|
the XR6 is all back together now finally
there was over spray inside the wheel arches in the rear so off came the wheels and i gave them a quick spray. then i gave the car its first wash since its been sprayed. then i polished the lips on the 18s ill grab some better photos of it tomorrow. at some stage tomorrow the gaurd and bonnet on the XF get wet rubbed and buffed cant wait to see how it comes out then next weekend the XR6 gets wet rubbed and buffed.
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
bry40l |
|
|||
|
youve done a top job mate, cant wait to see after they have both been buffed
_________________ BF XR6 |
|||
Top | |
Jonathan Kakousidis |
|
|||
|
well done mate that look awersome congrats on the fine workmanship
_________________ MY BABIES |
|||
Top | |
XD VAN 82 |
|
|||
|
bry40l wrote: youve done a top job mate, cant wait to see after they have both been buffed thanks mate, ill also post photos after the XF is done tomorrow.
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
XD VAN 82 |
|
|||
|
Jonathan Kakousidis wrote: well done mate that look awersome congrats on the fine workmanship thanks mate.
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
ToranaGuy |
|
|||
|
Looking good! Should look great with a buff.
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
Top | |
XD VAN 82 |
|
|||
|
ToranaGuy wrote: Looking good! Should look great with a buff. Cheers ToranaGuy thanks mate
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
XD VAN 82 |
|
|||
|
took the XR6 for a decent run today out to port arthur its quite a drive left at 1:00 got home at 5:20 the ed loved it only got abit worried when i noticed how low on fuel i was got to the next town and the servo had a sign up no fuel available so i had to keep going made it to a servo and whacked some fuel in it.
some photos from the day.
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
SLO247 |
|
||
|
Looks the goods! Very well done mate. Any plans to drop the front to level it out?
|
||
Top | |
XD VAN 82 |
|
|||
|
SLO247 wrote: Looks the goods! Very well done mate. Any plans to drop the front to level it out? thanks mate, i think the pictures make the front look higher then it is its not much higher then the back in person and it catches the tyres going in and out of driveways.
_________________ Daily: 1994 EF Falcon GLI, few mods with many more planned. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 85 guests |