Fordmods Logo

ED XR6 BUILD 

 

Page 23 of 30 [ 438 posts ] Go to page Previous  1 ... 20, 21, 22, 23, 24, 25, 26 ... 30  Next

 
 Post subject: Re: ED XR6 - finished
Posted: Wed Jun 15, 2011 6:58 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

XF FAIL: today i went and got the carby for the xf after some mucking about swapping missing things onto the new one i was ready to fire it up ran ok has a minor fuel leak wich will get fixed when it goes for a tune i cant do it any tighter without a proper pipe spanner or it will strip. while i had it running the radiator decided enough was enough and started leaking from some new areas then over heated :roll: all good i thought i had the spare radiator there i pull mine out to find they are different so tomorrow im taking it to the radiator shop where it may be repaired or i will have to order a new one, on the plus side i may have a set of extractors to go on.

pics.

old carbie
Image
Image
new carbie on
Image
radiator out
Image
old radiator
Image
the two side by side
Image
the one i was going to use is to wide.
also some photos from saturday after the gaurd and bonnet got wet sanded and buffed
Image
Image

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Wed Jun 15, 2011 7:40 pm 
Tyre Shredder
Offline

Posts: 329

Joined: 20th Apr 2011

Ride: 1991 eb1 fairmont

Location: townsville
QLD, Australia

{USERNAME} wrote:
XF FAIL: today i went and got the carby for the xf after some mucking about swapping missing things onto the new one i was ready to fire it up ran ok has a minor fuel leak wich will get fixed when it goes for a tune i cant do it any tighter without a proper pipe spanner or it will strip. while i had it running the radiator decided enough was enough and started leaking from some new areas then over heated :roll: all good i thought i had the spare radiator there i pull mine out to find they are different so tomorrow im taking it to the radiator shop where it may be repaired or i will have to order a new one, on the plus side i may have a set of extractors to go on.

pics.

old carbie
Image
Image
new carbie on
Image
radiator out

last i knew you just moved the mounts out to fit the wider radiator and changed hoses to suit
Image
old radiator
Image
the two side by side
Image
the one i was going to use is to wide.
also some photos from saturday after the gaurd and bonnet got wet sanded and buffed
Image
Image
Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Wed Jun 15, 2011 9:00 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

{USERNAME} wrote:
{USERNAME} wrote:
last i knew you just moved the mounts out to fit the wider radiator and changed hoses to suit


tried moving the mounts out and it was a no go might have another look in the morning just to make sure.

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Fri Jun 17, 2011 9:16 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

started wet sanding the ed tonight i got abit excited so i gave a small area a polish then hit it with the wax i think it should come up pretty good. tomorrow me and a mate will finish off the sanding and he will go over it with the buff.

Image
Image
Image
Image

i ended up getting my radiator repaired they also cleaned it out and pressure tested it.
Image

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Fri Jun 17, 2011 9:21 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

{USERNAME} wrote:
Image

lookin goood:D

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Fri Jun 17, 2011 9:25 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

thanks mate there will be plenty of photos to follow after its done.

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Fri Jun 17, 2011 11:57 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 930

Joined: 6th Nov 2004

Ride: EB SXR6 | ED XR8 Sprint

Location: Sydney
NSW, Australia

Ooh not bad. The red striping is looking fairly tired and pink against the new paint now! Any plans to change it?

 

_________________

EB SXR6. ED XR8 Sprint.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Sat Jun 18, 2011 6:17 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

{USERNAME} wrote:
Ooh not bad. The red striping is looking fairly tired and pink against the new paint now! Any plans to change it?


i think its just the dark photos it looks fairly red well i havent paid much attention either :P the strip in the rear bar has a few marks on it anyway so i may eventually get around to painting them.

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Mon Jun 20, 2011 1:41 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

the ed got buffed today and well it didnt go so well few parts didnt really buff up at all and my mate put some burn marks in the back right door and front left gaurd aswell as a couple on some side moulds and melted the edge of the passenger side door handle no pics i just parked it in the shed. No joy with the xf cold start is better but over the last few days the idle has gotten worse wich is getting annoying in stop start driving as now it basically stalls im hopefully going to get it tuned this week if i can. So once i have some money to spend im probably going to drop the ed off at a panel shop and see if they can fix the burn marks in the paint.

i may post photos tomorrow.

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Mon Jun 20, 2011 6:48 am 
Tyre Shredder
Offline

Posts: 329

Joined: 20th Apr 2011

Ride: 1991 eb1 fairmont

Location: townsville
QLD, Australia

{USERNAME} wrote:
the ed got buffed today and well it didnt go so well few parts didnt really buff up at all and my mate put some burn marks in the back right door and front left gaurd aswell as a couple on some side moulds and melted the edge of the passenger side door handle no pics i just parked it in the shed. No joy with the xf cold start is better but over the last few days the idle has gotten worse wich is getting annoying in stop start driving as now it basically stalls im hopefully going to get it tuned this week if i can. So once i have some money to spend im probably going to drop the ed off at a panel shop and see if they can fix the burn marks in the paint.

i may post photos tomorrow.


should be an idle adjust screw on your weber carb just warm the motor up then adjust until you get the desired idle
when i had my auto xf i used to set the idle while in drive with park brake on
Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Mon Jun 20, 2011 12:15 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

{USERNAME} wrote:
{USERNAME} wrote:
the ed got buffed today and well it didnt go so well few parts didnt really buff up at all and my mate put some burn marks in the back right door and front left gaurd aswell as a couple on some side moulds and melted the edge of the passenger side door handle no pics i just parked it in the shed. No joy with the xf cold start is better but over the last few days the idle has gotten worse wich is getting annoying in stop start driving as now it basically stalls im hopefully going to get it tuned this week if i can. So once i have some money to spend im probably going to drop the ed off at a panel shop and see if they can fix the burn marks in the paint.

i may post photos tomorrow.


should be an idle adjust screw on your weber carb just warm the motor up then adjust until you get the desired idle
when i had my auto xf i used to set the idle while in drive with park brake on


may give it a small tweak untill it goes for a tune up.

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Mon Jun 20, 2011 12:18 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

can you upload some pics for us?

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Mon Jun 20, 2011 6:53 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

i forgot about pics i was abit busy today but i took some of it in the shed there abit dark tho, not busy tomorrow so ill roll it out the shed and get some.

after wet sanding i was outside at 6am sanding for my mate to get there at 8:30 he never showed :roll:
Image
the cut and compound and wax
Image
after
Image
burn marks on the left gaurd
Image
along the front left wheel arch
Image
you can see the edge of the door handle bit blury im going to carefully sand it smooth you can also see a couple more burn marks under it
Image
roof
Image
back right door
Image

ill take it to a panel shop in the next few weeks and see what happens. ill post better photos tomorrow.

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Tue Jun 21, 2011 4:12 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1111

Joined: 26th May 2008

Gallery: 5 images

Ride: EF gli, EF Fairmont, ZH Fairlane

Location: New Norfolk
TAS, Australia

well some motorvation kicked in and i decided to have a go at fixing the burns on the clear. i also managed to some what fix the drivers door and doesnt look anywhere near as bad as what it did. i fixed the rear right door as best i could the marks dont stand out anywhere near as bad and from a distance you cant even notice them i now need to look into the left front gaurd.

Image
Image
Image
roof is looking better now
Image
drivers front door
Image
back right
Image

xf should have a new exhaust this week i hope or possibly next week the guy at the exhaust shop just has to chase up a tail pipe.

 

_________________

Daily: 1994 EF Falcon GLI, few mods with many more planned.

Soon to be daily: 1995 EF Fairmont, mostly stock.

Restoration: 1997 ZH Fairlane 500, 351 auto.

Top
 Profile  
 
 
 Post subject: Re: ED XR6 - finished
Posted: Tue Jun 21, 2011 8:25 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 1669

Joined: 23rd Dec 2004

Gallery: 1 images

Ride: Boosted ED XR6, EBII Mont Wgn

Power: 252 rwkw

Location: Mildura
VIC, Australia

looking good, keep it coming!

 

_________________

Image
{DESCRIPTION}
{DESCRIPTION}
FordMods Member #1761

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 23 of 30  [ 438 posts ]  Go to page Previous  1 ... 20, 21, 22, 23, 24, 25, 26 ... 30  Next

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 6:22 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names