|
fordman351 |
|
|||
|
I have no idea dude, the actual shifter unit look HUGE! I was actually wondering myself if it will actually fit into the console but because i dont have my car back yet ( ) i can't have a go at fiting it. I may have to trim a bit off the base here and there, but alot of it is structural and cutting the wrong bit might weaken it. Running the cable 'should' be a pretty easy job though...touch wood.
|
|||
Top | |
twase |
|
|||
|
{USERNAME} wrote: I have no idea dude, the actual shifter unit look HUGE! I was actually wondering myself if it will actually fit into the console but because i dont have my car back yet ( ) i can't have a go at fiting it. I may have to trim a bit off the base here and there, but alot of it is structural and cutting the wrong bit might weaken it. Running the cable 'should' be a pretty easy job though...touch wood. The only way I can see it going in neatly is to use a manual boot.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
fordman351 |
|
|||
|
Exackery what i was going to use
|
|||
Top | |
glenneaux |
|
||
|
people who fit those things into eb's (dave5l) cut the tunnel out and made a mount for it
|
||
Top | |
relaxed_diplomacy |
|
||
|
Once the wiring and ecu work is done, can the knowledge be used to create a plug-in kit with instructions?
_________________ wrecking 9/97 EL fairmont sedan burgundy 6cyl auto 270k modBAintake |
||
Top | |
Private9 |
|
|||
|
{USERNAME} wrote: Once the wiring and ecu work is done, can the knowledge be used to create a plug-in kit with instructions?
I can't exactly see the workshop in question giving out this sort of detail, and it'd be alot of work for fordman351! |
|||
Top | |
twase |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Once the wiring and ecu work is done, can the knowledge be used to create a plug-in kit with instructions? I can't exactly see the workshop in question giving out this sort of detail, and it'd be alot of work for fordman351!
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
fordman351 |
|
|||
|
Hmm, i can sense this could be an issue. Would they have to give me a complete diagram of what they have done to wire everything up? Or is it something i'll have to find out for myself? Might give them a buzz sometime and see what they can do, and how my car is going, it's been 4 weeks to the day on wednesday, and nothing yet.
Mood rating: Started | Then: | Onto: | Now: | Soon to be: |
|||
Top | |
frankieh |
|
|||
|
better a good job then a fast one...
|
|||
Top | |
fordman351 |
|
|||
|
True, true. But four weeks and no progress?
|
|||
Top | |
samftr |
|
|||
|
they probably dont know what the F**k to do and are lost. any feedback from them or what.
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
fordman351 |
|
|||
|
Haha great, don't say that. I'm sure they know exactly what they are doing .....i hope, i want my car back
|
|||
Top | |
MMD |
|
||
|
did you ask for an estimate on when you would get your car back ?
i hope you paid a flat fee - not an hourly rate |
||
Top | |
smoke_ |
|
|||
|
if you havent already, ring em every couple days and see where they're at.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
Top | |
biggav |
|
|||
|
saw ya car up there matt yes there has been work done on it so no stress mate was up there friday night with mine.
as has been said before, time = good workmanship so i wouldnt be getting all stressed about it just yet, you'll have plenty of time to enjoy it in the end.
_________________ 4.0lt Balanced Bottom End, ACL Race Internals, Rspec4 Cam, BPT Swichchip, PH4480, 2.5' Lukey, Scorcher Bodykit, T5 Manual {USERNAME} wrote: LOLLOLLOLLOLOLLOLLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOL
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 15 guests |